ExoskeletonsCYBERDYNEShowcase
CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)
By CYBERDYNE
The HAL Lumbar Type for Labor Support is a wearable 3.1 kg exoskeleton that supports the lower back when lifting and carrying.
CYBERDYNE presents the HAL Lumbar Type for Labor Support (HAL-LB03) as an exoskeleton for the lower back when lifting and carrying heavy loads. The page gives a weight of 3.1 kg including battery, dimensions of 292 x 450 x 522 mm, an operating time of ca. 4.5 hours and a charging time of ca. 2 hours. It is intended for wearers of 140-180 cm and 40-80 kg. Protection is IPX4 (water) and IP5X (dust), with an operating temperature of 0-40 °C. According to the page the product is sold only in Japan. Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- 01Exoskeleton
Wearable device intended to support the body during heavy, prolonged or overhead work.
- 02Wearable lower-back exoskeleton
In the exoskeletons category.
- 3.1kg
- Weight incl. battery
- 4.5h
- Runtime per charge
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)?
CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) is an exoskeleton from CYBERDYNE, listed for lower-back support when lifting and carrying heavy loads and heavy outdoor work. Key figures: weight 3.1 kg, runtime per charge approx. 4.5 h. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Runtime4.5hTHIS ROBOTmin 0.5 hmax 10 h
Place 3of 10
Higher than 6 of the 9 other robots, equal to 1
- Weight3.1kgTHIS ROBOTmin 0.2 kgmax 20 kg
Place 13of 31
Higher than 18 of the 30 other robots
Application
What was HAL Lumbar Type for Labor Support (HAL-LB03) developed for?
Lower-back support when lifting and carrying heavy loads
Heavy outdoor work
Business fit
When might HAL Lumbar Type for Labor Support (HAL-LB03) be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about HAL Lumbar Type for Labor Support (HAL-LB03), its manufacturer and this type of robot
In a 2019 discussion paper, EU-OSHA wrote that the long-term health effects of exoskeletons were still uncertain. The paper also discusses that when designing workplaces the hierarchy of prevention is leading, rather than relying on exoskeletons for an ergonomic work environment.
Source: EU-OSHA, The impact of using exoskeletons on occupational safety and health (2019, discussion paper)ISO 13482:2014 is a safety standard for personal care robots (mobile servant, physical assistant, person carrier); the ISO page states that a revision is expected. Which standards or rules apply to a particular exoskeleton depends on the model and its intended use: ask the provider for conformity information.
Source: ISO 13482:2014Robotleasen lists 10 robots from CYBERDYNE. You can find them all on the supplier page.
Market and supply
Is HAL Lumbar Type for Labor Support (HAL-LB03) available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 4 November 2026- Market statusShowcaseActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
CYBERDYNE
Organisation named in the documentation for HAL Lower Limb FL08. This profile links to product or developer information; current support and supply are unconfirmed.
OUR INTERPRETATION
Our perspective on HAL Lumbar Type for Labor Support (HAL-LB03)
CYBERDYNE presents the HAL Lumbar Type for Labor Support (HAL-LB03) as an exoskeleton for the lower back when lifting and carrying heavy loads. The page gives a weight of 3.1 kg including battery, dimensions of 292 x 450 x 522 mm, an operating time of ca. 4.5 hours and a charging time of ca. 2 hours. It is intended for wearers of 140-180 cm and 40-80 kg. Protection is IPX4 (water) and IP5X (dust), with an operating temperature of 0-40 °C. According to the page the product is sold only in Japan. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare HAL Lumbar Type for Labor Support (HAL-LB03)
| Feature | HAL Lumbar Type for Labor Support (HAL-LB03)CYBERDYNE | X-ble ShoulderHyundai Motor Group | MATE-XT GOComau |
|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available |
| Application | Lower-back support when lifting and carrying heavy loads, Heavy outdoor work | Overhead work, Assembly | Overhead work, Assembly |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to HAL Lumbar Type for Labor Support (HAL-LB03)
Profiles from the same category, selected by similar applications
Paexo Back
Different market status: commercially available
View robot OttobockCommercially availablePaexo Shoulder
Different market status: commercially available
View robot Hyundai Motor GroupShowcaseX-ble MEX
Different application: general applications
View robotFrequently asked questions
Questions about HAL Lumbar Type for Labor Support (HAL-LB03)
What is the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)?
CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) is an exoskeleton from CYBERDYNE, listed for lower-back support when lifting and carrying heavy loads and heavy outdoor work. Key figures: weight 3.1 kg, runtime per charge approx. 4.5 h. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)?
Key figures: weight 3.1 kg, runtime per charge approx. 4.5 h. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)?
CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) is listed under CYBERDYNE, based in Japan. Check local sales and support terms directly with the supplier.
Is the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) used for?
The applications listed for the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03) include lower-back support when lifting and carrying heavy loads and heavy outdoor work.
What are alternatives to the CYBERDYNE HAL Lumbar Type for Labor Support (HAL-LB03)?
Profiles include Ottobock Paexo Back, Ottobock Paexo Shoulder and Hyundai Motor Group X-ble MEX. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer cyberdyne.jp
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.