Robotleasen
AI robotics

AI roboticsTrossen RoboticsCommercially available

Trossen Robotics ViperX 300 6DOF

By Trossen Robotics

The Trossen Robotics ViperX 300 6DOF is a six-degree-of-freedom robot arm for research and education.

The Trossen Robotics ViperX 300 6DOF is a six-degree-of-freedom robot arm for research and education. The ViperX 300 6DOF has six degrees of freedom, a total span of 1500 mm, a working payload of 750 g and a repeatability of 1 mm (manufacturer figure) (as stated by Trossen Robotics). Trossen states the working payload applies inside maximum reach and recommends no more than 50% extension at 750 g. Single-side reach differs between the model page and the comparison table and is therefore not included. Availability in the Netherlands is not confirmed.

Status 2026

Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.
Type
AI robotics
Origin
Not publicly confirmed
Deployment
Not confirmed
Region
Not publicly confirmed
Applications
2 applications
  • 01AI robotics

    Artificial intelligence is central to perceiving and acting.

Photo not available
Photo not available
  • 02Research arm

    In the ai robotics category.

6
Degrees of freedom
1,500mm
Reach
totale spanwijdte
750g
Payload
werkpayload
1mm
Repeatability

Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.

What is Trossen Robotics ViperX 300 6DOF?

Trossen Robotics ViperX 300 6DOF is a robotics platform from Trossen Robotics, listed for manipulation research and robotics education. Key figures: degrees of freedom 6, reach 1,500 mm, payload 750 g, repeatability 1 mm. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.

Technology in brief

ViperX 300 6DOF to scale

A way to picture it: next to a person, a door or a familiar object.

1.5 marm length approx. 0.65 m
Working reach, viewed from above
  • 750 kg

    About the weight of 9.4 adults weighing 80 kg.

  • 1.5 m

    About 2.3 times an adult's arm length (about 65 cm).

Application

What was ViperX 300 6DOF developed for?

  • Manipulation research

  • Robotics education

Business fit

When might ViperX 300 6DOF be a fit?

An initial view based on the recorded category and model information

May be suitable for

  • Organisations assessing a robot for a defined task and work environment.
  • Teams comparing the robot's recorded profile with other options.
  • Businesses that want to validate the application and integration requirements.

Considerations

  • Confirm capabilities and current availability with the manufacturer or supplier.
  • Check the work environment, integration needs and local support before selecting a model.

Facts

Did you know?

Notable facts about ViperX 300 6DOF, its manufacturer and this type of robot

  1. Robotleasen lists 9 robots from Trossen Robotics. You can find them all on the supplier page.

Market and supply

Is ViperX 300 6DOF available?

A profile status is not a confirmed offer or delivery time

Status board

Checked 27 October 2026
  • Market statusCommercially availableActive
  • RegionNot publicly confirmedActive
  • Lease / RaaSNot confirmedNot confirmed
  • RentalNot confirmedNot confirmed

2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.

Manufacturer

Trossen Robotics

Organisation named in the documentation for ALOHA Stationary. This profile links to product or developer information; current support and supply are unconfirmed.

Not publicly confirmed9 robot profiles in the directory
View

OUR INTERPRETATION

Our perspective on ViperX 300 6DOF

The Trossen Robotics ViperX 300 6DOF is a six-degree-of-freedom robot arm for research and education. The ViperX 300 6DOF has six degrees of freedom, a total span of 1500 mm, a working payload of 750 g and a repeatability of 1 mm (manufacturer figure) (as stated by Trossen Robotics). Trossen states the working payload applies inside maximum reach and recommends no more than 50% extension at 750 g. Single-side reach differs between the model page and the comparison table and is therefore not included. Availability in the Netherlands is not confirmed.

Lease or rent

Can you lease this robot?

Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.

Request advice

Compare

Compare ViperX 300 6DOF

Open comparison overview
FeatureViperX 300 6DOFTrossen RoboticsStretch 4Hello RobotALOHA StationaryTrossen Robotics
Market statusCommercially availableShowcaseDiscontinued
ApplicationManipulation research, Robotics educationManipulation research, Mobile laboratory roboticsManipulation research, Collecting demonstration data
DeploymentNot confirmedNot confirmedNot confirmed
RegionNot publicly confirmedNot publicly confirmedNot publicly confirmed

Explore alternatives

Alternatives to ViperX 300 6DOF

Profiles from the same category, selected by similar applications

LuxAIShowcase

QTrobot

Different market status: showcase

View robot
OrionStarShowcase

GreetingBot Mini

Different market status: showcase

View robot
Trossen RoboticsCommercially available

WidowX 250 6DOF

Compare applications and suppliers

View robot

Frequently asked questions

Questions about ViperX 300 6DOF

What is the Trossen Robotics ViperX 300 6DOF?

Trossen Robotics ViperX 300 6DOF is a robotics platform from Trossen Robotics, listed for manipulation research and robotics education. Key figures: degrees of freedom 6, reach 1,500 mm, payload 750 g, repeatability 1 mm. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.

What are the specifications of the Trossen Robotics ViperX 300 6DOF?

Key figures: degrees of freedom 6, reach 1,500 mm, payload 750 g, repeatability 1 mm. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.

Which supplier is listed for the Trossen Robotics ViperX 300 6DOF?

Trossen Robotics ViperX 300 6DOF is listed under Trossen Robotics, based in United States. Check local sales and support terms directly with the supplier.

Is the Trossen Robotics ViperX 300 6DOF available to buy or lease in the Netherlands?

Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.

How much does the Trossen Robotics ViperX 300 6DOF cost?

No reliable public price is listed for this model. Costs depend on configuration and supplier.

What is the Trossen Robotics ViperX 300 6DOF used for?

The applications listed for the Trossen Robotics ViperX 300 6DOF include manipulation research and robotics education.

What are alternatives to the Trossen Robotics ViperX 300 6DOF?

Profiles include LuxAI QTrobot, OrionStar GreetingBot Mini and Trossen Robotics WidowX 250 6DOF. Compare their applications, specifications and market status.

Read more about robot leasing

News and insights

Articles are currently available in Dutch

News section

Next step

Could ViperX 300 6DOF fit your organisation?

Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.

Sources and checks

Checked against the manufacturer · last checked

Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.