CobotsNovarcShowcase
Novarc SWR - TIPTIG
By Novarc
The Novarc SWR TIPTIG is a GTAW welding cobot for pipe and pressure vessels from 2 to 30 in.
The SWR TIPTIG from Novarc is a welding cobot for pipe and pressure vessels from 2 to 30 in (5 to 75 cm) using the GTAW weld process. According to Novarc it is 4.5 m (15 ft) high, has a reach of 4.5 m, a footprint of 1.2 × 1.2 m and weighs approximately 3,500 lb. The wire diameter is 0.9 mm. The page names carbon and low-alloy steels, stainless steel and nickel alloys as materials. Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- 01Collaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- 02Welding cobot for pipe and pressure vessels
In the cobots category.
- 4.5m
- Height 15 ft
- 4.5m
- Reach 15 ft
- 3,500lb
- Weight
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Novarc SWR - TIPTIG?
Novarc SWR - TIPTIG is a collaborative robot arm from Novarc from Canada, listed for welding pipe and pressure vessels from 2 to 30 in. Key figures: height 4.5 m, reach 4.5 m, weight approx. 3,500 lb. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Height450cmTHIS ROBOTmin 50 cmmax 450 cm
Place 1of 7
Higher than 4 of the 6 other robots, equal to 2
- Reach4,500mmTHIS ROBOTmin 330 mmmax 4,500 mm
Place 1of 189
Higher than 186 of the 188 other robots, equal to 2
Application
What was SWR - TIPTIG developed for?
Welding pipe and pressure vessels from 2 to 30 in
Business fit
When might SWR - TIPTIG be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about SWR - TIPTIG, its manufacturer and this type of robot
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company historyA cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066Robotleasen lists 3 robots from Novarc. You can find them all on the supplier page.
Market and supply
Is SWR - TIPTIG available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 3 November 2026- Market statusShowcaseActive
- RegionCanadaActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
Novarc
Novarc is listed in the Robotleasen directory with 3 robot models.
OUR INTERPRETATION
Our perspective on SWR - TIPTIG
The SWR TIPTIG from Novarc is a welding cobot for pipe and pressure vessels from 2 to 30 in (5 to 75 cm) using the GTAW weld process. According to Novarc it is 4.5 m (15 ft) high, has a reach of 4.5 m, a footprint of 1.2 × 1.2 m and weighs approximately 3,500 lb. The wire diameter is 0.9 mm. The page names carbon and low-alloy steels, stainless steel and nickel alloys as materials. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare SWR - TIPTIG
| Feature | SWR - TIPTIGNovarc | UR10eUniversal Robots | Panda (FER)Franka Emika |
|---|---|---|---|
| Market status | Showcase | Commercially available | Discontinued |
| Application | Welding pipe and pressure vessels from 2 to 30 in | Machine tending, Packaging | Robotics research, Robot control research |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Canada | Netherlands | Not publicly confirmed |
Explore alternatives
Alternatives to SWR - TIPTIG
Profiles from the same category, selected by similar applications
Sawyer
Different market status: discontinued
View robot Rethink RoboticsDiscontinuedBaxter
Different market status: discontinued
View robot NovarcShowcaseSWR - TIGMIG
Compare applications and suppliers
View robotFrequently asked questions
Questions about SWR - TIPTIG
What is the Novarc SWR - TIPTIG?
Novarc SWR - TIPTIG is a collaborative robot arm from Novarc from Canada, listed for welding pipe and pressure vessels from 2 to 30 in. Key figures: height 4.5 m, reach 4.5 m, weight approx. 3,500 lb. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Novarc SWR - TIPTIG?
Key figures: height 4.5 m, reach 4.5 m, weight approx. 3,500 lb. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Novarc SWR - TIPTIG?
Novarc SWR - TIPTIG is listed under Novarc, based in Canada. Check local sales and support terms directly with the supplier.
Is the Novarc SWR - TIPTIG available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Novarc SWR - TIPTIG cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Novarc SWR - TIPTIG used for?
The applications listed for the Novarc SWR - TIPTIG include welding pipe and pressure vessels from 2 to 30 in.
What are alternatives to the Novarc SWR - TIPTIG?
Profiles include Rethink Robotics Sawyer, Rethink Robotics Baxter and Novarc SWR - TIGMIG. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer novarctech.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.