CobotsJAKA RoboticsShowcase
JAKA Robotics Pro 12
The JAKA Pro 12 is a collaborative robot with IP68, a 12 kg payload and 1,327 mm reach.
The JAKA Pro 12 is a collaborative robot from the JAKA Pro series with a 12 kg maximum payload, 1,327 mm reach and a weight of 41 kg (including cables). JAKA lists IP68 for the arm, a nominal power consumption of 500 W, a base diameter of 188 mm and an operating temperature of -10 °C to 50 °C. The table gives an accuracy of ±0.03 mm; the feature text also mentions 0.02 mm repeatability for the Pro series, so only the table value is used. Programming is graphical, by drag and teach, via SRCI and offline. The page names welding, loading and unloading, handling and polishing and grinding as application scenarios. Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- 01Collaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- 02IP68 cobot
In the cobots category.
- 12kg
- Payload
- 1,327mm
- Reach
- 41kg
- Weight inclusief kabels
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is JAKA Robotics Pro 12?
JAKA Robotics Pro 12 is a collaborative robot arm from JAKA Robotics, listed for welding, loading and unloading and handling. Key figures: payload 12 kg, reach 1,327 mm, weight 41 kg. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
Pro 12 to scale
A way to picture it: next to a person, a door or a familiar object.
- 12 kg
About 12 one-litre cartons of milk.
- 1.33 m
About 2 times an adult's arm length (about 65 cm).
- 29%Carries about 12 kg
That is about 29% of its own weight of about 41 kg, according to the manufacturer.
How does it compare with other collaborative robot arms?
We compare each value with the other collaborative robot arms in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Payload12kg
Typical for a collaborative robot arm
Of the 193 others, 71 carry more, 12 the same and 110 less.
Typical: 5 to 18 kg
- Weight41kg
Typical for a collaborative robot arm
Of the 126 others, 39 are heavier, 6 the same weight and 81 lighter.
Typical: 16.5 to 45 kg
- Reach1,327mm
Typical for a collaborative robot arm
Of the 188 others, 58 reach further, 1 as far and 129 less far.
Typical: 800 to 1,500 mm
Application
What was Pro 12 developed for?
Welding
Loading and unloading
Handling
Polishing and grinding
Business fit
When might Pro 12 be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Pro 12, its manufacturer and this type of robot
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company historyA cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066Robotleasen lists 19 robots from JAKA Robotics. You can find them all on the supplier page.
Market and supply
Is Pro 12 available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 5 November 2026- Market statusShowcaseActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
JAKA Robotics
JAKA Robotics is listed in the Robotleasen directory with 19 robot models.
OUR INTERPRETATION
Our perspective on Pro 12
The JAKA Pro 12 is a collaborative robot from the JAKA Pro series with a 12 kg maximum payload, 1,327 mm reach and a weight of 41 kg (including cables). JAKA lists IP68 for the arm, a nominal power consumption of 500 W, a base diameter of 188 mm and an operating temperature of -10 °C to 50 °C. The table gives an accuracy of ±0.03 mm; the feature text also mentions 0.02 mm repeatability for the Pro series, so only the table value is used. Programming is graphical, by drag and teach, via SRCI and offline. The page names welding, loading and unloading, handling and polishing and grinding as application scenarios. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Pro 12
| Feature | Pro 12JAKA Robotics | Pro 5JAKA Robotics | UR10eUniversal Robots |
|---|---|---|---|
| Market status | Showcase | Showcase | Commercially available |
| Application | Welding, Loading and unloading | Welding, Polishing and grinding | Machine tending, Packaging |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Netherlands |
Explore alternatives
Alternatives to Pro 12
Profiles from the same category, selected by similar applications
Panda (FER)
Different market status: discontinued
View robot Rethink RoboticsDiscontinuedSawyer
Different market status: discontinued
View robot Rethink RoboticsDiscontinuedBaxter
Different market status: discontinued
View robotFrequently asked questions
Questions about Pro 12
What is the JAKA Robotics Pro 12?
JAKA Robotics Pro 12 is a collaborative robot arm from JAKA Robotics, listed for welding, loading and unloading and handling. Key figures: payload 12 kg, reach 1,327 mm, weight 41 kg. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the JAKA Robotics Pro 12?
Key figures: payload 12 kg, reach 1,327 mm, weight 41 kg. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the JAKA Robotics Pro 12?
JAKA Robotics Pro 12 is listed under JAKA Robotics, based in China. Check local sales and support terms directly with the supplier.
Is the JAKA Robotics Pro 12 available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the JAKA Robotics Pro 12 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the JAKA Robotics Pro 12 used for?
The applications listed for the JAKA Robotics Pro 12 include welding, loading and unloading, handling and polishing and grinding.
What are alternatives to the JAKA Robotics Pro 12?
Profiles include Franka Emika Panda (FER), Rethink Robotics Sawyer and Rethink Robotics Baxter. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer jaka.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.