CobotsHanwha RoboticsShowcase
Hanwha Robotics HCR-32
The Hanwha HCR-32 is a collaborative robot with a 32 kg payload and 1,820 mm reach.
The Hanwha HCR-32 is a collaborative robot with a 32 kg payload and 1,820 mm reach. It has six degrees of freedom. Hanwha lists a repeatability of ±0.05 mm, a weight of 82 kg, a footprint of Ø260 mm and IP65. Mounting is on the floor, on a wall or on the ceiling. The page names no specific applications and gives no linear speed, only maximum joint speeds. Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- 01Collaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- 02High-payload cobot
In the cobots category.
- 32kg
- Payload
- 1,820mm
- Reach
- 6
- Degrees of freedom
- ±0.05mm
- Repeatability
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Hanwha Robotics HCR-32?
Hanwha Robotics HCR-32 is a collaborative robot arm from Hanwha Robotics from South Korea, listed for general applications. Key figures: payload 32 kg, reach 1,820 mm, degrees of freedom 6, repeatability ±0.05 mm. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
HCR-32 to scale
A way to picture it: next to a person, a door or a familiar object.
- 32 kg
About 32 one-litre cartons of milk.
- ± 0.05 mm
Thinner than a sheet of printer paper (about 0.1 mm).
- 1.82 m
About 2.8 times an adult's arm length (about 65 cm).
- 39%Carries about 32 kg
That is about 39% of its own weight of about 82 kg, according to the manufacturer.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Payload32kgTHIS ROBOTmin 0.5 kgmax 60 kg
Place 9of 194
Higher than 185 of the 193 other robots
- Weight82kgTHIS ROBOTmin 3.6 kgmax 990 kg
Place 13of 127
Higher than 114 of the 126 other robots
- Reach1,820mmTHIS ROBOTmin 330 mmmax 4,500 mm
Place 19of 189
Higher than 170 of the 188 other robots
Application
What was HCR-32 developed for?
General applications
Business fit
When might HCR-32 be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about HCR-32, its manufacturer and this type of robot
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company historyA cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066Robotleasen lists 5 robots from Hanwha Robotics. You can find them all on the supplier page.
Market and supply
Is HCR-32 available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 5 November 2026- Market statusShowcaseActive
- RegionSouth KoreaActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
Hanwha Robotics
Hanwha Robotics is listed in the Robotleasen directory with 5 robot models.
OUR INTERPRETATION
Our perspective on HCR-32
The Hanwha HCR-32 is a collaborative robot with a 32 kg payload and 1,820 mm reach. It has six degrees of freedom. Hanwha lists a repeatability of ±0.05 mm, a weight of 82 kg, a footprint of Ø260 mm and IP65. Mounting is on the floor, on a wall or on the ceiling. The page names no specific applications and gives no linear speed, only maximum joint speeds. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare HCR-32
| Feature | HCR-32Hanwha Robotics | UR10eUniversal Robots | Panda (FER)Franka Emika |
|---|---|---|---|
| Market status | Showcase | Commercially available | Discontinued |
| Application | General applications | Machine tending, Packaging | Robotics research, Robot control research |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | South Korea | Netherlands | Not publicly confirmed |
Explore alternatives
Alternatives to HCR-32
Profiles from the same category, selected by similar applications
Sawyer
Different market status: discontinued
View robot Rethink RoboticsDiscontinuedBaxter
Different market status: discontinued
View robot DOBOTShowcaseCR3A
Compare applications and suppliers
View robotFrequently asked questions
Questions about HCR-32
What is the Hanwha Robotics HCR-32?
Hanwha Robotics HCR-32 is a collaborative robot arm from Hanwha Robotics from South Korea, listed for general applications. Key figures: payload 32 kg, reach 1,820 mm, degrees of freedom 6, repeatability ±0.05 mm. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Hanwha Robotics HCR-32?
Key figures: payload 32 kg, reach 1,820 mm, degrees of freedom 6, repeatability ±0.05 mm. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Hanwha Robotics HCR-32?
Hanwha Robotics HCR-32 is listed under Hanwha Robotics, based in South Korea. Check local sales and support terms directly with the supplier.
Is the Hanwha Robotics HCR-32 available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Hanwha Robotics HCR-32 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Hanwha Robotics HCR-32 used for?
The applications listed for the Hanwha Robotics HCR-32 include general applications.
What are alternatives to the Hanwha Robotics HCR-32?
Profiles include Rethink Robotics Sawyer, Rethink Robotics Baxter and DOBOT CR3A. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer hanwharobotics.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.