CobotsFANUCCommercially available
FANUC CRX-20/14A
By FANUC
The FANUC CRX-20/14A is a collaborative robot with 20 kg payload and 1,418 mm reach.
The FANUC CRX-20/14A is a collaborative robot with 20 kg payload and 1,418 mm reach. According to FANUC repeatability is ±0.04 mm. Weight is 41 kg. Mounting: floor, angle, inverted. Speed is 1000 mm/s in collaborative mode and 1000 mm/s in high-speed mode. Controller: R-50iA. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- 01Collaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- 02Collaborative robot
In the cobots category.
- 20kg
- Payload
- 1,418mm
- Reach
- ±0.04mm
- Repeatability
- 41kg
- Weight
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is FANUC CRX-20/14A?
FANUC CRX-20/14A is a collaborative robot arm from FANUC from Japan, listed for assembly, machine tending and palletising. Key figures: payload 20 kg, reach 1,418 mm, repeatability ±0.04 mm, weight 41 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
CRX-20/14A to scale
A way to picture it: next to a person, a door or a familiar object.
- 20 kg
About 20 one-litre cartons of milk.
- 3,600 km/h
Faster than walking pace (about 5 km/h).
- ± 0.04 mm
Thinner than a sheet of printer paper (about 0.1 mm).
- 1.42 m
About 2.2 times an adult's arm length (about 65 cm).
- 49%Carries about 20 kg
That is about 49% of its own weight of about 41 kg, according to the manufacturer.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Payload20kgTHIS ROBOTmin 0.5 kgmax 50 kg
Place 23of 132
Higher than 99 of the 131 other robots, equal to 10
- Speed1,000m/sTHIS ROBOTmin 1 m/smax 2,500 m/s
Place 12of 35
Higher than 15 of the 34 other robots, equal to 8
- Weight41kgTHIS ROBOTmin 4.3 kgmax 588 kg
Place 21of 81
Higher than 55 of the 80 other robots, equal to 5
- Reach1,418mmTHIS ROBOTmin 330 mmmax 2,100 mm
Place 34of 127
Higher than 88 of the 126 other robots, equal to 5
Application
What was CRX-20/14A developed for?
Assembly
Machine tending
Palletising
Business fit
When might CRX-20/14A be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about CRX-20/14A, its manufacturer and this type of robot
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company historyA cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066FANUC was founded in 1972 and is based in Japan.
Market and supply
Is CRX-20/14A available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 12 October 2026- Market statusCommercially availableActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
FANUC
Industrial robotics and cobot manufacturer for manufacturing, machine tending, assembly and automation.
OUR INTERPRETATION
Our perspective on CRX-20/14A
The FANUC CRX-20/14A is a collaborative robot with 20 kg payload and 1,418 mm reach. According to FANUC repeatability is ±0.04 mm. Weight is 41 kg. Mounting: floor, angle, inverted. Speed is 1000 mm/s in collaborative mode and 1000 mm/s in high-speed mode. Controller: R-50iA. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare CRX-20/14A
| Feature | CRX-20/14AFANUC | CRX-20iA/L Food GradeFANUC | CRX-20iA/LFANUC |
|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available |
| Application | Assembly, Machine tending | Assembly, Machine tending | Assembly, Machine tending |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to CRX-20/14A
Profiles from the same category, selected by similar applications
CRX-10iA/L Paint
Different application: painting
View robot Rainbow RoboticsCommercially availableRB-serie
Different application: welding
View robot DOBOTCommercially availableCR10
Compare applications and suppliers
View robotFrequently asked questions
Questions about CRX-20/14A
What is the FANUC CRX-20/14A?
FANUC CRX-20/14A is a collaborative robot arm from FANUC from Japan, listed for assembly, machine tending and palletising. Key figures: payload 20 kg, reach 1,418 mm, repeatability ±0.04 mm, weight 41 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the FANUC CRX-20/14A?
Key figures: payload 20 kg, reach 1,418 mm, repeatability ±0.04 mm, weight 41 kg. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the FANUC CRX-20/14A?
FANUC CRX-20/14A is listed under FANUC, based in Japan. Check local sales and support terms directly with the supplier.
Is the FANUC CRX-20/14A available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the FANUC CRX-20/14A cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the FANUC CRX-20/14A used for?
The applications listed for the FANUC CRX-20/14A include assembly, machine tending and palletising.
What are alternatives to the FANUC CRX-20/14A?
Profiles include FANUC CRX-10iA/L Paint, Rainbow Robotics RB-serie and DOBOT CR10. Compare their applications, specifications and market status.
Next step
Could CRX-20/14A fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer fanucamerica.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.