CobotsFANUCCommercially available
FANUC CR-35iB
By FANUC
The FANUC CR-35iB is a collaborative robot with 50 kg payload and 1,643 mm reach.
The FANUC CR-35iB is a collaborative robot with 50 kg payload and 1,643 mm reach. According to FANUC repeatability is ±0.03 mm. Weight is 375 kg. Mounting: floor. Speed is 300 mm/s in collaborative mode and 750 mm/s in high-speed mode. Protection class according to FANUC: IP54/IP67 (depending on part and option). Controller: R-30iB Plus. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- 01Collaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- 02Collaborative robot
In the cobots category.
- 50kg
- Payload
- 1,643mm
- Reach
- ±0.03mm
- Repeatability
- 375kg
- Weight
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is FANUC CR-35iB?
FANUC CR-35iB is a collaborative robot arm from FANUC from Japan, listed for assembly, machine tending and palletising. Key figures: payload 50 kg, reach 1,643 mm, repeatability ±0.03 mm, weight 375 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
CR-35iB to scale
A way to picture it: next to a person, a door or a familiar object.
- 50 kg
About 50 one-litre cartons of milk.
- 2,700 km/h
Faster than walking pace (about 5 km/h).
- ± 0.03 mm
Thinner than a sheet of printer paper (about 0.1 mm).
- 1.64 m
About 2.5 times an adult's arm length (about 65 cm).
- 13%Carries about 50 kg
That is about 13% of its own weight of about 375 kg, according to the manufacturer.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Payload50kgTHIS ROBOTmin 0.5 kgmax 50 kg
Place 1of 132
Higher than 130 of the 131 other robots, equal to 1
- Speed750m/sTHIS ROBOTmin 1 m/smax 2,500 m/s
Place 21of 35
Higher than 14 of the 34 other robots
- Weight375kgTHIS ROBOTmin 4.3 kgmax 588 kg
Place 2of 81
Higher than 79 of the 80 other robots
- Reach1,643mmTHIS ROBOTmin 330 mmmax 2,100 mm
Place 26of 127
Higher than 101 of the 126 other robots
Application
What was CR-35iB developed for?
Assembly
Machine tending
Palletising
Business fit
When might CR-35iB be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about CR-35iB, its manufacturer and this type of robot
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company historyA cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066FANUC was founded in 1972 and is based in Japan.
Market and supply
Is CR-35iB available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 12 October 2026- Market statusCommercially availableActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
FANUC
Industrial robotics and cobot manufacturer for manufacturing, machine tending, assembly and automation.
OUR INTERPRETATION
Our perspective on CR-35iB
The FANUC CR-35iB is a collaborative robot with 50 kg payload and 1,643 mm reach. According to FANUC repeatability is ±0.03 mm. Weight is 375 kg. Mounting: floor. Speed is 300 mm/s in collaborative mode and 750 mm/s in high-speed mode. Protection class according to FANUC: IP54/IP67 (depending on part and option). Controller: R-30iB Plus. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare CR-35iB
| Feature | CR-35iBFANUC | UR10eUniversal Robots | RB-serieRainbow Robotics |
|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available |
| Application | Assembly, Machine tending | Machine tending, Packaging | Assembly, Machine tending |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Netherlands | International |
Explore alternatives
Alternatives to CR-35iB
Profiles from the same category, selected by similar applications
CR10
Compare applications and suppliers
View robot Techman RobotCommercially availableTM S-serie
Different application: inspection
View robot Franka EmikaDiscontinuedPanda (FER)
Different market status: discontinued
View robotFrequently asked questions
Questions about CR-35iB
What is the FANUC CR-35iB?
FANUC CR-35iB is a collaborative robot arm from FANUC from Japan, listed for assembly, machine tending and palletising. Key figures: payload 50 kg, reach 1,643 mm, repeatability ±0.03 mm, weight 375 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the FANUC CR-35iB?
Key figures: payload 50 kg, reach 1,643 mm, repeatability ±0.03 mm, weight 375 kg. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the FANUC CR-35iB?
FANUC CR-35iB is listed under FANUC, based in Japan. Check local sales and support terms directly with the supplier.
Is the FANUC CR-35iB available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the FANUC CR-35iB cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the FANUC CR-35iB used for?
The applications listed for the FANUC CR-35iB include assembly, machine tending and palletising.
What are alternatives to the FANUC CR-35iB?
Profiles include DOBOT CR10, Techman Robot TM S-serie and Franka Emika Panda (FER). Compare their applications, specifications and market status.
Next step
Could CR-35iB fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer fanucamerica.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.