Robotleasen

CobotsDOBOTShowcase

DOBOT CR5A

By DOBOT

The DOBOT CR5A is a cobot from the CRA series with a 5 kg payload and a working radius of 900 mm.

The CR5A appears in the specification table of DOBOT's CRA series. According to the manufacturer it has a maximum payload of 5 kg, a working radius of 900 mm, a repeatability of ± 0.02 mm and a weight of 25 kg. The maximum linear speed is 4 m/s at a power of 150 W. The page names application areas for the series, not per model. Availability in the Netherlands is not confirmed.

Status 2026

ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.
Type
Cobots
Origin
Not publicly confirmed
Deployment
Not confirmed
Region
Not publicly confirmed
Applications
1 application
  • 01Collaborative robot arm

    Built to work alongside people, after a risk assessment of the application.

Schematic · photo not available
  • 02Collaborative robot arm (CRA series)

    In the cobots category.

5kg
Payload
900mm
Reach
± 0.02mm
Repeatability
25kg
Weight

Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.

What is DOBOT CR5A?

DOBOT CR5A is a collaborative robot arm from DOBOT, listed for general applications. Key figures: payload 5 kg, reach 900 mm, repeatability ± 0.02 mm, weight 25 kg. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.

Technology in brief

CR5A to scale

A way to picture it: next to a person, a door or a familiar object.

0.9 marm length approx. 0.65 m
Working reach, viewed from above
  • 5 kg

    About 5 one-litre cartons of milk.

  • 14.4 km/h

    Faster than walking pace (about 5 km/h).

  • ± 0.02 mm

    Thinner than a sheet of printer paper (about 0.1 mm).

  • 0.9 m

    About 1.4 times an adult's arm length (about 65 cm).

  • 20%
    Carries about 5 kg

    That is about 20% of its own weight of about 25 kg, according to the manufacturer.

In practice

How does it compare with other robots?

Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.

  • This robot
  • Other robots in the category
  • Payload5kg

    Place 124of 194

    Higher than 46 of the 193 other robots, equal to 24

  • Speed4m/s

    Place 42of 74

    Higher than 25 of the 73 other robots, equal to 7

  • Weight25kg

    Place 71of 127

    Higher than 51 of the 126 other robots, equal to 5

  • Reach900mm

    Place 125of 189

    Higher than 58 of the 188 other robots, equal to 6

Application

What was CR5A developed for?

  • General applications

Business fit

When might CR5A be a fit?

An initial view based on the recorded category and model information

May be suitable for

  • Organisations assessing a robot for a defined task and work environment.
  • Teams comparing the robot's recorded profile with other options.
  • Businesses that want to validate the application and integration requirements.

Considerations

  • Confirm capabilities and current availability with the manufacturer or supplier.
  • Check the work environment, integration needs and local support before selecting a model.

Facts

Did you know?

Notable facts about CR5A, its manufacturer and this type of robot

  1. The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.

    Source: Universal Robots, company history
  2. A cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.

  3. The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.

    Source: ISO/TS 15066
  4. Robotleasen lists 31 robots from DOBOT. You can find them all on the supplier page.

Market and supply

Is CR5A available?

A profile status is not a confirmed offer or delivery time

Status board

Checked 3 November 2026
  • Market statusShowcaseActive
  • RegionNot publicly confirmedActive
  • Lease / RaaSNot confirmedNot confirmed
  • RentalNot confirmedNot confirmed

2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.

Manufacturer

DOBOT

DOBOT is listed in the Robotleasen directory with 16 robot models.

Not publicly confirmed16 robot profiles in the directory
View

OUR INTERPRETATION

Our perspective on CR5A

The CR5A appears in the specification table of DOBOT's CRA series. According to the manufacturer it has a maximum payload of 5 kg, a working radius of 900 mm, a repeatability of ± 0.02 mm and a weight of 25 kg. The maximum linear speed is 4 m/s at a power of 150 W. The page names application areas for the series, not per model. Availability in the Netherlands is not confirmed.

Lease or rent

Can you lease this robot?

Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.

Request advice

Compare

Compare CR5A

Open comparison overview
FeatureCR5ADOBOTUR10eUniversal RobotsPanda (FER)Franka Emika
Market statusShowcaseCommercially availableDiscontinued
ApplicationGeneral applicationsMachine tending, PackagingRobotics research, Robot control research
DeploymentNot confirmedNot confirmedNot confirmed
RegionNot publicly confirmedNetherlandsNot publicly confirmed

Explore alternatives

Alternatives to CR5A

Profiles from the same category, selected by similar applications

Rethink RoboticsDiscontinued

Sawyer

Different market status: discontinued

View robot
Rethink RoboticsDiscontinued

Baxter

Different market status: discontinued

View robot
DOBOTShowcase

CR3A

Compare applications and suppliers

View robot

Frequently asked questions

Questions about CR5A

What is the DOBOT CR5A?

DOBOT CR5A is a collaborative robot arm from DOBOT, listed for general applications. Key figures: payload 5 kg, reach 900 mm, repeatability ± 0.02 mm, weight 25 kg. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.

What are the specifications of the DOBOT CR5A?

Key figures: payload 5 kg, reach 900 mm, repeatability ± 0.02 mm, weight 25 kg. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.

Which supplier is listed for the DOBOT CR5A?

DOBOT CR5A is listed under DOBOT, based in Not publicly confirmed. Check local sales and support terms directly with the supplier.

Is the DOBOT CR5A available to buy or lease in the Netherlands?

Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.

How much does the DOBOT CR5A cost?

No reliable public price is listed for this model. Costs depend on configuration and supplier.

What is the DOBOT CR5A used for?

The applications listed for the DOBOT CR5A include general applications.

What are alternatives to the DOBOT CR5A?

Profiles include Rethink Robotics Sawyer, Rethink Robotics Baxter and DOBOT CR3A. Compare their applications, specifications and market status.

Read more about robot leasing

News and insights

Articles are currently available in Dutch

News section

Next step

Looking for a robot that is available today?

Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.

Sources and checks

Checked against the manufacturer · last checked

Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.