Industrial robotsDAIHENShowcase
DAIHEN FD-B6
By DAIHEN
The DAIHEN FD-B6 is a six-axis robot with a 6 kg wrist payload and a slim wrist with internal cabling.
The FD-B6 is a six-axis robot from DAIHEN. According to the manufacturer it has a wrist payload of 6 kg, a 10 kg payload on the upper arm and a weight of 145 kg. The wrist motor is built into the arm, cables and air hoses run internally and the protection is IP64-equivalent. The page names synchro-feed welding, cold tandem welding and handling. The page does not state a country. Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- 01Industrial robot
Reprogrammable manipulator (robot arm) with three or more axes, for automation in industry.
- 02Six-axis robot for welding and handling
In the industrial robots category.
- 6kg
- Payload pols
- 145kg
- Weight
- 6
- Degrees of freedom
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is DAIHEN FD-B6?
DAIHEN FD-B6 is an industrial robot from DAIHEN, listed for synchro-feed welding, cold tandem welding and handling. Key figures: payload 6 kg, weight 145 kg, degrees of freedom 6. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
FD-B6 to scale
A way to picture it: next to a person, a door or a familiar object.
- 6 kg
About 6 one-litre cartons of milk.
- 4%Carries about 6 kg
That is about 4% of its own weight of about 145 kg, according to the manufacturer.
How does it compare with other industrial robots?
We compare each value with the other industrial robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Payload6kg
Low for an industrial robot
Of the 714 others, 559 carry more, 47 the same and 108 less.
Typical: 7 to 150 kg
- Weight145kg
Typical for an industrial robot
Of the 438 others, 253 are heavier, 5 the same weight and 180 lighter.
Typical: 38 to 1,090 kg
Application
What was FD-B6 developed for?
Synchro-feed welding
Cold tandem welding
Handling
Business fit
When might FD-B6 be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about FD-B6, its manufacturer and this type of robot
According to ISO 8373:2021, an industrial robot is an automatically controlled manipulator that is reprogrammable, has multiple purposes and can be programmed in three or more axes.
Source: IFR, Industrial robots (ISO 8373)In 1961 the Unimate was installed on a General Motors assembly line in Ewing Township, New Jersey. Guinness World Records lists it as the first industrial production robot.
Source: Guinness World Records, First industrial production robotA safety standard for industrial robots, ISO 10218-1, appeared in February 2025 as its third edition.
Source: ISO 10218-1:2025Regulation (EU) 2023/1230 (the Machinery Regulation) replaces Machinery Directive 2006/42/EC and applies from 20 January 2027.
Source: EU-OSHA, Regulation (EU) 2023/1230
Market and supply
Is FD-B6 available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 4 November 2026- Market statusShowcaseActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
DAIHEN
DAIHEN is listed in the Robotleasen directory with 13 robot models.
OUR INTERPRETATION
Our perspective on FD-B6
The FD-B6 is a six-axis robot from DAIHEN. According to the manufacturer it has a wrist payload of 6 kg, a 10 kg payload on the upper arm and a weight of 145 kg. The wrist motor is built into the arm, cables and air hoses run internally and the protection is IP64-equivalent. The page names synchro-feed welding, cold tandem welding and handling. The page does not state a country. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare FD-B6
| Feature | FD-B6DAIHEN | Motoman MOTOMINIYaskawa | Motoman PL190Yaskawa |
|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available |
| Application | Synchro-feed welding, Cold tandem welding | Assembly, Handling | Palletising |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to FD-B6
Profiles from the same category, selected by similar applications
Motoman PL320
Different market status: commercially available
View robot YaskawaCommercially availableMotoman PL500
Different market status: commercially available
View robot DAIHENShowcaseFD-V8
Different application: arc welding
View robotFrequently asked questions
Questions about FD-B6
What is the DAIHEN FD-B6?
DAIHEN FD-B6 is an industrial robot from DAIHEN, listed for synchro-feed welding, cold tandem welding and handling. Key figures: payload 6 kg, weight 145 kg, degrees of freedom 6. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the DAIHEN FD-B6?
Key figures: payload 6 kg, weight 145 kg, degrees of freedom 6. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the DAIHEN FD-B6?
DAIHEN FD-B6 is listed under DAIHEN, based in Not publicly confirmed. Check local sales and support terms directly with the supplier.
Is the DAIHEN FD-B6 available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the DAIHEN FD-B6 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the DAIHEN FD-B6 used for?
The applications listed for the DAIHEN FD-B6 include synchro-feed welding, cold tandem welding and handling.
What are alternatives to the DAIHEN FD-B6?
Profiles include Yaskawa Motoman PL320, Yaskawa Motoman PL500 and DAIHEN FD-V8. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer daihen-robot.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.