Construction robotsAquajetCommercially available
Aquajet Aqua Cutter 710V XL
The Aquajet Aqua Cutter 710V XL is a tracked hydrodemolition robot of 2,430 kg for removing concrete with high-pressure water.
The Aqua Cutter 710V XL is a diesel-powered hydrodemolition robot for large-scale concrete removal. According to Aquajet it has wider and longer tracks than the standard 710V, which spread the weight and handle higher reaction forces. An extendable tower reaches horizontal, vertical and overhead surfaces. According to Aquajet the machine weighs 2,430 kg, runs on a diesel, 18 kW and has a working width of 0 to 2.45 m (extended 0 to 4.45 m). The maximum reaction force is 4,000 N. The product page gives a water jet pressure of 3,000 bar as a headline figure. It is operated by radio and remote control at up to 300 metres. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- 01Diesel-powered hydrodemolition robot with wide tracks
In the construction robots category.
- 2,430kg
- Weight
- 25m/min
- Speed rol, automatisch), 15 m/min (rupsen, automatisch
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Aquajet Aqua Cutter 710V XL?
Aquajet Aqua Cutter 710V XL is a construction robot from Aquajet Systems from Sweden, listed for large-scale hydrodemolition of concrete, concrete repair of bridges and tunnels and industrial structures and parking structures. Key figures: weight 2,430 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Speed0.4m/sTHIS ROBOTmin 0.3 m/smax 500 m/s
Place 15of 20
Higher than 2 of the 19 other robots, equal to 3
- Weight2,430kgTHIS ROBOTmin 560 kgmax 11,600 kg
Place 6of 23
Higher than 17 of the 22 other robots
Application
What was Aqua Cutter 710V XL developed for?
Large-scale hydrodemolition of concrete
Concrete repair of bridges and tunnels
Industrial structures and parking structures
Business fit
When might Aqua Cutter 710V XL be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Aqua Cutter 710V XL, its manufacturer and this type of robot
Robotleasen lists 6 robots from Aquajet. You can find them all on the supplier page.
Market and supply
Is Aqua Cutter 710V XL available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 27 October 2026- Market statusCommercially availableActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
Aquajet Systems
Aquajet Systems is listed in the Robotleasen directory with 6 robot models.
OUR INTERPRETATION
Our perspective on Aqua Cutter 710V XL
The Aqua Cutter 710V XL is a diesel-powered hydrodemolition robot for large-scale concrete removal. According to Aquajet it has wider and longer tracks than the standard 710V, which spread the weight and handle higher reaction forces. An extendable tower reaches horizontal, vertical and overhead surfaces. According to Aquajet the machine weighs 2,430 kg, runs on a diesel, 18 kW and has a working width of 0 to 2.45 m (extended 0 to 4.45 m). The maximum reaction force is 4,000 N. The product page gives a water jet pressure of 3,000 bar as a headline figure. It is operated by radio and remote control at up to 300 metres. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Aqua Cutter 710V XL
| Feature | Aqua Cutter 710V XLAquajet | Brokk 300Brokk | DXR 310Husqvarna |
|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available |
| Application | Large-scale hydrodemolition of concrete, Concrete repair of bridges and tunnels | Demolition, Nuclear and industrial decommissioning | Demolition, Renovation |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to Aqua Cutter 710V XL
Profiles from the same category, selected by similar applications
Jaibot
Different application: drilling in ceilings
View robot COBODCommercially availableBOD2
Different application: printing buildings
View robot CyBe ConstructionCommercially availableRC 3Dp
Different application: on-site printing
View robotFrequently asked questions
Questions about Aqua Cutter 710V XL
What is the Aquajet Aqua Cutter 710V XL?
Aquajet Aqua Cutter 710V XL is a construction robot from Aquajet Systems from Sweden, listed for large-scale hydrodemolition of concrete, concrete repair of bridges and tunnels and industrial structures and parking structures. Key figures: weight 2,430 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Aquajet Aqua Cutter 710V XL?
Key figures: weight 2,430 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Aquajet Aqua Cutter 710V XL?
Aquajet Aqua Cutter 710V XL is listed under Aquajet Systems, based in Sweden. Check local sales and support terms directly with the supplier.
Is the Aquajet Aqua Cutter 710V XL available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Aquajet Aqua Cutter 710V XL cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Aquajet Aqua Cutter 710V XL used for?
The applications listed for the Aquajet Aqua Cutter 710V XL include large-scale hydrodemolition of concrete, concrete repair of bridges and tunnels and industrial structures and parking structures.
What are alternatives to the Aquajet Aqua Cutter 710V XL?
Profiles include Hilti Jaibot, COBOD BOD2 and CyBe Construction RC 3Dp. Compare their applications, specifications and market status.
Next step
Could Aqua Cutter 710V XL fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer aquajet.se
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.