Construction robotsAquajetCommercially available
Aquajet Aqua Cutter 450A
The Aquajet Aqua Cutter 450A is a tracked hydrodemolition robot of 1,315 kg for removing concrete with high-pressure water.
The Aqua Cutter 450A is a compact, electric, tracked hydrodemolition robot for confined spaces. The hydraulic arm reaches up to 3 metres and follows curved surfaces. Aquajet describes it as emission-free and low-noise, suited to urban areas, tunnels and parking structures, and lists the Evolution 3.0 control system and patented Infinity oscillation. According to Aquajet the machine weighs 1,315 kg, runs on a electric, 3-phase, 5.5 kW and has a working width of 0 to 1.7 m (extended 0 to 3.2 m). The maximum reaction force is 1,600 N. The product page gives a water jet pressure of 3,000 bar as a headline figure. It is operated by radio and remote control at up to 300 metres. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- 01Compact electric hydrodemolition robot
In the construction robots category.
- 1,315kg
- Weight Robot zonder PCM 940 kg, PCM 375 kg
- 25m/min
- Speed rol, automatisch), 15 m/min (rupsen, automatisch
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Aquajet Aqua Cutter 450A?
Aquajet Aqua Cutter 450A is a construction robot from Aquajet Systems from Sweden, listed for hydrodemolition of concrete in confined spaces, tunnels and parking structures and concrete repair in urban areas. Key figures: weight 1,315 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Speed0.4m/sTHIS ROBOTmin 0.3 m/smax 500 m/s
Place 15of 20
Higher than 2 of the 19 other robots, equal to 3
- Weight1,315kgTHIS ROBOTmin 560 kgmax 11,600 kg
Place 19of 29
Higher than 10 of the 28 other robots
Application
What was Aqua Cutter 450A developed for?
Hydrodemolition of concrete in confined spaces
Tunnels and parking structures
Concrete repair in urban areas
Business fit
When might Aqua Cutter 450A be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Aqua Cutter 450A, its manufacturer and this type of robot
Robotleasen lists 6 robots from Aquajet. You can find them all on the supplier page.
Market and supply
Is Aqua Cutter 450A available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 27 October 2026- Market statusCommercially availableActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
Aquajet Systems
Aquajet Systems is listed in the Robotleasen directory with 6 robot models.
OUR INTERPRETATION
Our perspective on Aqua Cutter 450A
The Aqua Cutter 450A is a compact, electric, tracked hydrodemolition robot for confined spaces. The hydraulic arm reaches up to 3 metres and follows curved surfaces. Aquajet describes it as emission-free and low-noise, suited to urban areas, tunnels and parking structures, and lists the Evolution 3.0 control system and patented Infinity oscillation. According to Aquajet the machine weighs 1,315 kg, runs on a electric, 3-phase, 5.5 kW and has a working width of 0 to 1.7 m (extended 0 to 3.2 m). The maximum reaction force is 1,600 N. The product page gives a water jet pressure of 3,000 bar as a headline figure. It is operated by radio and remote control at up to 300 metres. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Aqua Cutter 450A
| Feature | Aqua Cutter 450AAquajet | Brokk 300Brokk | DXR 310Husqvarna |
|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available |
| Application | Hydrodemolition of concrete in confined spaces, Tunnels and parking structures | Demolition, Nuclear and industrial decommissioning | Demolition, Renovation |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to Aqua Cutter 450A
Profiles from the same category, selected by similar applications
Jaibot
Different application: drilling in ceilings
View robot COBODCommercially availableBOD2
Different application: printing buildings
View robot AquajetCommercially availableAqua Cutter 410A
Different application: tunnels and parking garages
View robotFrequently asked questions
Questions about Aqua Cutter 450A
What is the Aquajet Aqua Cutter 450A?
Aquajet Aqua Cutter 450A is a construction robot from Aquajet Systems from Sweden, listed for hydrodemolition of concrete in confined spaces, tunnels and parking structures and concrete repair in urban areas. Key figures: weight 1,315 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Aquajet Aqua Cutter 450A?
Key figures: weight 1,315 kg, speed max. 25 m/min. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Aquajet Aqua Cutter 450A?
Aquajet Aqua Cutter 450A is listed under Aquajet Systems, based in Sweden. Check local sales and support terms directly with the supplier.
Is the Aquajet Aqua Cutter 450A available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Aquajet Aqua Cutter 450A cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Aquajet Aqua Cutter 450A used for?
The applications listed for the Aquajet Aqua Cutter 450A include hydrodemolition of concrete in confined spaces, tunnels and parking structures and concrete repair in urban areas.
What are alternatives to the Aquajet Aqua Cutter 450A?
Profiles include Hilti Jaibot, COBOD BOD2 and Aquajet Aqua Cutter 410A. Compare their applications, specifications and market status.
Next step
Could Aqua Cutter 450A fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer aquajet.se
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.