Logistics robotsAgiBotCommercially available
AgiBot D1 MaxPro
By Agibot
The AgiBot D1 MaxPro is an industrial platform for heavy loads up to 50 kg, with IP67 and a 2,081 Wh battery.
According to AgiBot the D1 MaxPro is intended for heavy industrial tasks. According to the page it carries up to 50 kg continuously, has protection rating IP67 and a 2,081 Wh battery. The runtime is 5.5 hours unloaded and at least 2 hours fully loaded (as stated by AgiBot). It operates from -20 to 55 °C, wades in water up to 20 cm deep, climbs continuous stairs up to 30 cm and can right itself after a fall. The uses named are heavy-duty mounting, transport of heavy loads, material handling, logistics and emergency rescue. Dimensions, weight, speed and sensors appear on the page only in an image. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- 01Autonomous mobile
Plans its own route instead of following a fixed line.
- 02Industrial platform for heavy loads
In the logistics robots category.
- 50kg
- Payload continu
- 5.5u
- Runtime per charge unloaded); ≥ 2 u (beladen
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is AgiBot D1 MaxPro?
AgiBot D1 MaxPro is a logistics robot from Agibot, listed for transport of heavy loads, material handling and heavy-duty mounting. Key figures: payload up to 50 kg, runtime per charge 5.5 u. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Technology in brief
D1 MaxPro to scale
A way to picture it: next to a person, a door or a familiar object.
- 50 kg
About 50 one-litre cartons of milk.
In practice
How does it compare with other robots?
Each value next to the other robots in the same category in our guide, where that value is known. All figures according to the manufacturer; unconfirmed values are marked in the figures at the top.
- This robot
- Other robots in the category
- Payload50kgTHIS ROBOTmin 5 kgmax 41,000 kg
Place 79of 84
Higher than 4 of the 83 other robots, equal to 1
- Runtime5.5hTHIS ROBOTmin 0.5 hmax 250 h
Place 51of 58
Higher than 7 of the 57 other robots
Application
What was D1 MaxPro developed for?
Transport of heavy loads
Material handling
Heavy-duty mounting
Emergency rescue
Business fit
When might D1 MaxPro be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about D1 MaxPro, its manufacturer and this type of robot
An AGV follows fixed lines, magnets or reflectors. An AMR navigates on a map and drives around obstacles by itself.
The safety standard ISO 3691-4 applies to autonomous transport robots in companies.
Source: ISO 3691-4Robotleasen lists 7 robots from AgiBot. You can find them all on the supplier page.
Market and supply
Is D1 MaxPro available?
A profile status is not a confirmed offer or delivery time
Status board
Checked 29 October 2026- Market statusCommercially availableActive
- RegionNot publicly confirmedActive
- Lease / RaaSNot confirmedNot confirmed
- RentalNot confirmedNot confirmed
2 of 4 confirmedAvailability depends on market launch, region and the manufacturer's channels.
Manufacturer
Agibot
Agibot is listed in the Robotleasen directory with 12 robot models.
OUR INTERPRETATION
Our perspective on D1 MaxPro
According to AgiBot the D1 MaxPro is intended for heavy industrial tasks. According to the page it carries up to 50 kg continuously, has protection rating IP67 and a 2,081 Wh battery. The runtime is 5.5 hours unloaded and at least 2 hours fully loaded (as stated by AgiBot). It operates from -20 to 55 °C, wades in water up to 20 cm deep, climbs continuous stairs up to 30 cm and can right itself after a fall. The uses named are heavy-duty mounting, transport of heavy loads, material handling, logistics and emergency rescue. Dimensions, weight, speed and sensors appear on the page only in an image. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare D1 MaxPro
| Feature | D1 MaxProAgiBot | AR FamilyANSCER Robotics | Mouse/Tunnel FamilyBluepath Robotics |
|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available |
| Application | Transport of heavy loads, Material handling | Transporting internal material on shelves, Transferring material through a conveyor configuration | Towing transport carts between production points, Moving carts for internal warehouse replenishment |
| Deployment | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
Explore alternatives
Alternatives to D1 MaxPro
Profiles from the same category, selected by similar applications
EMMA Family
Different application: moving goods carriers in manufacturing
View robot Goat RoboticsCommercially availableGTX Family
Different application: transporting totes and material carriers internally
View robot RobotnikCommercially availableRB-FIQUS
Different application: heavy-load transport
View robotFrequently asked questions
Questions about D1 MaxPro
What is the AgiBot D1 MaxPro?
AgiBot D1 MaxPro is a logistics robot from Agibot, listed for transport of heavy loads, material handling and heavy-duty mounting. Key figures: payload up to 50 kg, runtime per charge 5.5 u. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the AgiBot D1 MaxPro?
Key figures: payload up to 50 kg, runtime per charge 5.5 u. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the AgiBot D1 MaxPro?
AgiBot D1 MaxPro is listed under Agibot, based in China. Check local sales and support terms directly with the supplier.
Is the AgiBot D1 MaxPro available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the AgiBot D1 MaxPro cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the AgiBot D1 MaxPro used for?
The applications listed for the AgiBot D1 MaxPro include transport of heavy loads, material handling, heavy-duty mounting and emergency rescue.
What are alternatives to the AgiBot D1 MaxPro?
Profiles include IPLUSMOBOT EMMA Family, Goat Robotics GTX Family and Robotnik RB-FIQUS. Compare their applications, specifications and market status.
Next step
Could D1 MaxPro fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer agibot.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.