Cleaning robotsWYBOTShowcase
WYBOT C1 Pro
By WYBOT
The WYBOT C1 Pro is a pool cleaning robot for the pool floor, walls and waterline.
The WYBOT C1 Pro is a cordless pool robot with an infrared sensor and a lithium-ion battery. The manufacturer states a pool size of up to 150 m² for above-ground or in-ground pools, 2 h 30 min runtime and a weight of 7.8 kg. It has a 180 µm filter basket with PVC brush and works with the app or a button on the robot. Availability in the Netherlands has not been confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- ModularPool cleaning robot
In the cleaning robots category.
- Battery
- 21.6 V / 4,600 mAh
- Runtime per charge
- 2 h 30 min
- Weight
- 7.8 kg
- Speed
- 11 m/min
Li-ion
How long it works on one full battery.
What the robot itself weighs.
Its top speed.
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is WYBOT C1 Pro?
WYBOT C1 Pro is a cleaning robot from WYBOT from China, listed for cleaning of the pool floor, walls and waterline. Key figures: battery 21.6 V / 4,600 mAh, runtime per charge 2 h 30 min, weight 7.8 kg, speed 11 m/min. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other cleaning robots?
We compare each value with the other cleaning robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Speed0.18m/s
Typical for a cleaning robot
Of the 65 others, 48 are faster and 17 slower.
Typical: 0.17 to 1.2 m/s
- Runtime2.5h
Short runtime for a cleaning robot
Of the 98 others, 89 run longer per charge, 3 as long and 6 shorter.
Typical: 3.5 to 7.5 h
- Weight7.8kg
Light for a cleaning robot
Of the 135 others, 129 are heavier and 6 lighter.
Typical: 10.5 to 220 kg
One work cycle in a day
How many hours does it work, and how many does it need to charge? Runtime depends on load and mode; the number of cycles per day depends on the version and the deployment.
- Working2.5 h10% of the day
- Charging2.5 h10% of the day
- Rest of the day19 h79% of the day
Application
What was C1 Pro developed for?
Cleaning of the pool floor, walls and waterline
Business fit
When might C1 Pro be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about C1 Pro, its manufacturer and this type of robot
Robotleasen lists 18 robots from WYBOT. You can find them all on the supplier page.
Market and supply
Is C1 Pro available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 10 November 2026- Market statusShowcaseconfirmed
Mainly a demonstration model; not regularly on sale.
- RegionChinaconfirmed
Where the model is supplied, according to the profile.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
2 of 4 settled. The rest depends on the supplier.
View available alternativesManufacturer
WYBOT
WYBOT is listed in the Robotleasen directory with 18 robot models.
OUR INTERPRETATION
Our perspective on C1 Pro
The WYBOT C1 Pro is a cordless pool robot with an infrared sensor and a lithium-ion battery. The manufacturer states a pool size of up to 150 m² for above-ground or in-ground pools, 2 h 30 min runtime and a weight of 7.8 kg. It has a 180 µm filter basket with PVC brush and works with the app or a button on the robot. Availability in the Netherlands has not been confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare C1 Pro with alternatives
| Feature | C1 ProWYBOT · this robot | X16 SWEEPTennant | BG1 SeriesPudu Robotics | SPIDERAX Solar Robot |
|---|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available | Commercially available |
| Application | Cleaning of the pool floor, walls and waterline | Sweeping dry debris on industrial indoor floors, Scheduled autonomous sweeping tasks | Sweeping and wet scrubbing of indoor floors, Cleaning along floor and shelving edges | Automatic brush cleaning of commercial rooftop solar panels, Recurring cleaning cycles from a permanent installation |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | China | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different market status: commercially available | Different market status: commercially available | Different market status: commercially available |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about C1 Pro
What is the WYBOT C1 Pro?
WYBOT C1 Pro is a cleaning robot from WYBOT from China, listed for cleaning of the pool floor, walls and waterline. Key figures: battery 21.6 V / 4,600 mAh, runtime per charge 2 h 30 min, weight 7.8 kg, speed 11 m/min. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the WYBOT C1 Pro?
Key figures: battery 21.6 V / 4,600 mAh, runtime per charge 2 h 30 min, weight 7.8 kg, speed 11 m/min. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the WYBOT C1 Pro?
WYBOT C1 Pro is listed under WYBOT, based in China. Check local sales and support terms directly with the supplier.
Is the WYBOT C1 Pro available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the WYBOT C1 Pro cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the WYBOT C1 Pro used for?
The applications listed for the WYBOT C1 Pro include cleaning of the pool floor, walls and waterline.
What are alternatives to the WYBOT C1 Pro?
Profiles include Tennant X16 SWEEP, Pudu Robotics BG1 Series and AX Solar Robot SPIDER. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer eu.wybotics.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.