Inspection and security robotsWindbotixCommercially available
Windbotix Nemo
By Windbotix
Small remote-controlled robot for internal inspection of wind turbine blades.
Nemo is a small remote-controlled robot from Windbotix for inspecting the inside of wind turbine blades. According to the manufacturer the robot reaches up to 75% of the blade length; the Full Vision model with gimbal covers up to 80% of the blade surface. The robot is available battery-powered or tethered, with a Sony camera and an Nvidia Jetson processor. Availability in the Netherlands has not been confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- SensorsInspection rounds
Drives or walks fixed rounds and records what happens.
- ModularInternal inspection robot for wind turbine blades
In the inspection and security robots category.
- Weight
- 4.6 kg
- Speed
- 0.6 m/s
- Runtime per charge
- up to 4 hours
What the robot itself weighs.
Its top speed.
per battery, onbeperkt in kabelversie
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Windbotix Nemo?
Windbotix Nemo is an inspection and security robot from Windbotix from Spain, listed for internal inspection of wind turbine blades and documenting blade damage. Key figures: weight 4.6 kg, speed 0.6 m/s, runtime per charge up to 4 hours. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other inspection and security robots?
We compare each value with the other inspection and security robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Speed0.6m/s
Typical for an inspection and security robot
Of the 55 others, 32 are faster and 23 slower.
Typical: 0.3 to 2 m/s
- Runtime4h
Typical for an inspection and security robot
Of the 64 others, 31 run longer per charge, 14 as long and 19 shorter.
Typical: 2.5 to 8 h
- Weight4.6kg
Light for an inspection and security robot
Of the 108 others, 100 are heavier, 2 the same weight and 6 lighter.
Typical: 9 to 97.5 kg
Application
What was Nemo developed for?
Internal inspection of wind turbine blades
Documenting blade damage
Business fit
When might Nemo be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Nemo, its manufacturer and this type of robot
In power plants, for example, inspection robots read meters and trace leaks with thermal or gas sensors.
Market and supply
Is Nemo available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 8 November 2026- Market statusCommercially availableconfirmed
The model is on sale; you can request it from a supplier.
- RegionSpainconfirmed
Where the model is supplied, according to the profile.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
2 of 4 settled. The rest depends on the supplier.
Ask about availabilityManufacturer
Windbotix
Windbotix is listed in the Robotleasen directory with one robot model.
OUR INTERPRETATION
Our perspective on Nemo
Nemo is a small remote-controlled robot from Windbotix for inspecting the inside of wind turbine blades. According to the manufacturer the robot reaches up to 75% of the blade length; the Full Vision model with gimbal covers up to 80% of the blade surface. The robot is available battery-powered or tethered, with a Sony camera and an Nvidia Jetson processor. Availability in the Netherlands has not been confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Nemo with alternatives
| Feature | NemoWindbotix · this robot | IguanaExail | Cameleon LGExail | Dragonfish SeriesAutel Robotics |
|---|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available | Commercially available |
| Application | Internal inspection of wind turbine blades, Documenting blade damage | Reconnoitring difficult-to-reach locations with cameras, Moving sensor equipment during professional inspections | Reconnoitring locations remotely with cameras, Supporting inspections with interchangeable sensor equipment | Energy-infrastructure inspection, Observation for monitoring and emergency management |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Spain | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different application: reconnoitring difficult-to-reach locations with cameras | Different application: reconnoitring locations remotely with cameras | Different application: energy-infrastructure inspection |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about Nemo
What is the Windbotix Nemo?
Windbotix Nemo is an inspection and security robot from Windbotix from Spain, listed for internal inspection of wind turbine blades and documenting blade damage. Key figures: weight 4.6 kg, speed 0.6 m/s, runtime per charge up to 4 hours. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Windbotix Nemo?
Key figures: weight 4.6 kg, speed 0.6 m/s, runtime per charge up to 4 hours. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Windbotix Nemo?
Windbotix Nemo is listed under Windbotix, based in Spain. Check local sales and support terms directly with the supplier.
Is the Windbotix Nemo available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Windbotix Nemo cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Windbotix Nemo used for?
The applications listed for the Windbotix Nemo include internal inspection of wind turbine blades and documenting blade damage.
What are alternatives to the Windbotix Nemo?
Profiles include Exail Iguana, Exail Cameleon LG and Autel Robotics Dragonfish Series. Compare their applications, specifications and market status.
Next step
Could Nemo fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer windbotix.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.