Construction robotsVerticoCommercially available
Vertico Solo
By Vertico
The Vertico Solo is a stand-alone 3D concrete printing system with a robot for prefab and small-scale design work.
Vertico calls the Solo a stand-alone 3D concrete printing system for both large-scale prefab construction and small-scale design experimentation. The page describes a 3.2 m reach on a 50 cm pedestal, printing through 270 degrees around the base; the specification table says 2,300 mm, so the page conflicts and the reach has not been used. Payload is 150 kg, layer height 3 to 18 mm and pump output 1.5 to 8 l/min. The printhead is 2-component or 1-component. The page lists upgrades (colour, height and reach extension, rotating printhead, start/stop), options (dust extractor, light curtains, print bed, safety fences, silo) and slicing software included at no extra licence fee. The dimensions on the page are also unclear (two depths and two heights) and have not been used. Availability in the Netherlands is not confirmed.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- FeatureConstruction robot
Intended to take over heavy, repetitive or dangerous work on the building site.
- ModularStand-alone 3D concrete printing system with robot arm
In the construction robots category.
- Payload
- 150 kg
The most weight it can carry or lift.
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is Vertico Solo?
Vertico Solo is a construction robot from Vertico, listed for large-scale prefab construction and small-scale design experiments. Key figures: payload 150 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
Application
What was Solo developed for?
Large-scale prefab construction
Small-scale design experiments
Business fit
When might Solo be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Solo, its manufacturer and this type of robot
Robotleasen lists 4 robots from Vertico. You can find them all on the supplier page.
Market and supply
Is Solo available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 30 October 2026- Market statusCommercially availableconfirmed
The model is on sale; you can request it from a supplier.
- RegionNot publicly confirmednot confirmed
Not known whether it is supplied in the Netherlands. Ask a supplier.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
1 of 4 settled. The rest depends on the supplier.
Ask about availabilityManufacturer
Vertico
Vertico supplies 3D concrete printing systems: print heads, track-mounted and fixed-cell printing robots, and slicing and control software, for design, construction and education.
OUR INTERPRETATION
Our perspective on Solo
Vertico calls the Solo a stand-alone 3D concrete printing system for both large-scale prefab construction and small-scale design experimentation. The page describes a 3.2 m reach on a 50 cm pedestal, printing through 270 degrees around the base; the specification table says 2,300 mm, so the page conflicts and the reach has not been used. Payload is 150 kg, layer height 3 to 18 mm and pump output 1.5 to 8 l/min. The printhead is 2-component or 1-component. The page lists upgrades (colour, height and reach extension, rotating printhead, start/stop), options (dust extractor, light curtains, print bed, safety fences, silo) and slicing software included at no extra licence fee. The dimensions on the page are also unclear (two depths and two heights) and have not been used. Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Solo with alternatives
| Feature | SoloVertico · this robot | Brokk 300Brokk | DXR 310Husqvarna | JaibotHilti |
|---|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available | Commercially available |
| Application | Large-scale prefab construction, Small-scale design experiments | Demolition, Nuclear and industrial decommissioning | Demolition, Renovation | Drilling in ceilings, MEP installation |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different application: demolition | Different application: demolition | Different application: drilling in ceilings |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about Solo
What is the Vertico Solo?
Vertico Solo is a construction robot from Vertico, listed for large-scale prefab construction and small-scale design experiments. Key figures: payload 150 kg. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Vertico Solo?
Key figures: payload 150 kg. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the Vertico Solo?
Vertico Solo is listed under Vertico. Check local sales and support terms directly with the supplier.
Is the Vertico Solo available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Vertico Solo cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the Vertico Solo used for?
The applications listed for the Vertico Solo include large-scale prefab construction and small-scale design experiments.
What are alternatives to the Vertico Solo?
Profiles include Brokk 300, Husqvarna DXR 310 and Hilti Jaibot. Compare their applications, specifications and market status.
Next step
Could Solo fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer vertico.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.