Humanoid robotsUnitreeShowcase
Unitree G1
Unitree G1 is a robot for research and demonstrations.
The standard Unitree G1 has 23 joints, a depth camera and 3D LiDAR. Unitree lists approximately two hours of battery life and a removable 9,000 mAh battery. Its folded dimensions are 690 × 450 × 300 mm. Depending on configuration, G1 EDU can have 23–43 joints and optional finger sensors. Custom software development is confirmed only for EDU. Demonstrations do not establish autonomous business deployment; Unitree says some demonstrated functions remain under development.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- MovementHumanoid robot
Human-like build, so it can work in spaces designed for people.
- ModularCompact humanoid
In the humanoid robots category.
- Height
- 132 cm
- Weight
- approx. 35 kg
- Degrees of freedom
- 23
- Runtime per charge
- approx. 2 hours
From the floor to the top.
What the robot itself weighs.
Number of joints: how freely the arm moves.
How long it works on one full battery.
Figures describe the standard G1; EDU configurations differ in weight and joints.
What is Unitree G1?
Unitree G1 is a humanoid robot from Unitree Robotics from China, listed for research, demonstrations and showcase. Key figures: height 132 cm, weight approx. 35 kg, degrees of freedom 23, runtime per charge approx. 2 hours. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other humanoid robots?
We compare each value with the other humanoid robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Runtime2h
Typical for a humanoid robot
Of the 60 others, 42 run longer per charge, 13 as long and 5 shorter.
Typical: 2 to 6 h
- Height132cm
Typical for a humanoid robot
Of the 78 others, 57 are taller and 21 shorter.
Typical: 130 to 174 cm
- Weight35kg
Light for a humanoid robot
Of the 88 others, 67 are heavier, 1 the same weight and 20 lighter.
Typical: 39 to 71 kg
Application
What was G1 developed for?
Research
Demonstrations
Showcase
Business fit
When might G1 be a fit?
An initial view based on the recorded category and model information
What Unitree says
- Figures describe the standard G1; EDU configurations differ in weight and joints.
- Depth camera and 3D LiDAR; custom software development only with EDU.
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about G1, its manufacturer and this type of robot
- 1920
The word 'robot' comes from the play R.U.R. (1920) by Czech writer Karel Čapek. 'Robota' means forced labour or drudgery.
Source: Wikipedia, R.U.R. - 2000
Honda presented ASIMO in 2000, for years the best-known walking humanoid in the world.
Source: Wikipedia, ASIMO - 2016
Unitree Robotics was founded in 2016.
Robotleasen lists 26 robots from Unitree. You can find them all on the supplier page.
Video
G1 in action
Unitree demonstrates the movements of its G1 humanoid.
Market and supply
Is G1 available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 30 September 2026- Market statusShowcaseconfirmed
Mainly a demonstration model; not regularly on sale.
- RegionNot confirmed for the Netherlandsnot confirmed
Not known whether it is supplied in the Netherlands. Ask a supplier.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
1 of 4 settled. The rest depends on the supplier.
View available alternativesManufacturer
Unitree Robotics
Manufacturer of robot dogs and humanoid platforms followed by research teams, education providers and innovation programmes.
OUR INTERPRETATION
Our perspective on G1
The standard Unitree G1 has 23 joints, a depth camera and 3D LiDAR. Unitree lists approximately two hours of battery life and a removable 9,000 mAh battery. Its folded dimensions are 690 × 450 × 300 mm. Depending on configuration, G1 EDU can have 23–43 joints and optional finger sensors. Custom software development is confirmed only for EDU. Demonstrations do not establish autonomous business deployment; Unitree says some demonstrated functions remain under development.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare G1 with alternatives
| Feature | G1Unitree · this robot | EMIEW3Hitachi | OP3ROBOTIS | THORMANG3ROBOTIS |
|---|---|---|---|---|
| Market status | Showcase | Showcase | Showcase | Showcase |
| Application | Research, Demonstrations | Historical visitor guidance, Business proof-of-concept projects with robot IT integration | Motion research, Humanoid teaching | Humanoid research, Developing motion algorithms |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | International | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different application: historical visitor guidance | Different application: motion research | Different application: humanoid research |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about G1
What is the Unitree G1?
Unitree G1 is a humanoid robot from Unitree Robotics from China, listed for research, demonstrations and showcase. Key figures: height 132 cm, weight approx. 35 kg, degrees of freedom 23, runtime per charge approx. 2 hours. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Unitree G1?
Key figures: height 132 cm, weight approx. 35 kg, degrees of freedom 23, runtime per charge approx. 2 hours. Figures describe the standard G1; EDU configurations differ in weight and joints.
Which supplier is listed for the Unitree G1?
Unitree G1 is listed under Unitree Robotics. Check local sales and support terms directly with the supplier.
Is the Unitree G1 available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Unitree G1 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier. Ask a supplier for price information
What is the Unitree G1 used for?
The applications listed for the Unitree G1 include research, demonstrations and showcase.
What are alternatives to the Unitree G1?
Profiles include Hitachi EMIEW3, ROBOTIS OP3 and ROBOTIS THORMANG3. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer unitree.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.