Industrial robotsOMRONShowcase
OMRON Viper (650 / 850)
By OMRON
The OMRON Viper is a six-axis robot arm with 5 kg payload and 653 or 855 mm reach.
The Viper is a six-axis robot arm from OMRON for machining, assembly and handling, available as Viper 650 and Viper 850 with EtherCAT or Ethernet. According to the manufacturer payload is up to 5 kg, reach 653 mm (650) or 855 mm (850) and weight 34 kg and 36 kg respectively. The robot can be table, floor or inverted mounted and can be programmed with ACE software. Availability in the Netherlands has not been confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- ProductionIndustrial robot
Reprogrammable manipulator (robot arm) with three or more axes, for automation in industry.
- ModularCompact six-axis robot
In the industrial robots category.
- Payload
- max. 5 kg
- Reach
- 653 mm
- Weight
- 34 kg
The most weight it can carry or lift.
650) / 855 mm (850
650) / 36 kg (850
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is OMRON Viper (650 / 850)?
OMRON Viper (650 / 850) is an industrial robot from OMRON from Japan, listed for assembly, material handling and machining. Key figures: payload max. 5 kg, reach 653 mm, weight 34 kg. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other industrial robots?
We compare each value with the other industrial robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Payload5kg
Low for an industrial robot
Of the 846 others, 728 carry more, 26 the same and 92 less.
Typical: 7 to 130 kg
- Weight36kg
Light for an industrial robot
Of the 547 others, 428 are heavier, 2 the same weight and 117 lighter.
Typical: 42 to 1,020 kg
- Reach855mm
Short reach for an industrial robot
Of the 771 others, 591 reach further and 180 less far.
Typical: 900 to 2,702 mm
Application
What was Viper (650 / 850) developed for?
Assembly
Material handling
Machining
Business fit
When might Viper (650 / 850) be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about Viper (650 / 850), its manufacturer and this type of robot
- 2021
According to ISO 8373:2021, an industrial robot is an automatically controlled manipulator that is reprogrammable, has multiple purposes and can be programmed in three or more axes.
Source: IFR, Industrial robots (ISO 8373) - 1961
In 1961 the Unimate was installed on a General Motors assembly line in Ewing Township, New Jersey. Guinness World Records lists it as the first industrial production robot.
Source: Guinness World Records, First industrial production robot - 2025
A safety standard for industrial robots, ISO 10218-1, appeared in February 2025 as its third edition.
Source: ISO 10218-1:2025 - 2023
Regulation (EU) 2023/1230 (the Machinery Regulation) replaces Machinery Directive 2006/42/EC and applies from 20 January 2027.
Source: EU-OSHA, Regulation (EU) 2023/1230
Market and supply
Is Viper (650 / 850) available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 11 November 2026- Market statusShowcaseconfirmed
Mainly a demonstration model; not regularly on sale.
- RegionJapanconfirmed
Where the model is supplied, according to the profile.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
2 of 4 settled. The rest depends on the supplier.
View available alternativesManufacturer
OMRON
Organisation named in the documentation for LD series. This profile links to product or developer information; current support and supply are unconfirmed.
OUR INTERPRETATION
Our perspective on Viper (650 / 850)
The Viper is a six-axis robot arm from OMRON for machining, assembly and handling, available as Viper 650 and Viper 850 with EtherCAT or Ethernet. According to the manufacturer payload is up to 5 kg, reach 653 mm (650) or 855 mm (850) and weight 34 kg and 36 kg respectively. The robot can be table, floor or inverted mounted and can be programmed with ACE software. Availability in the Netherlands has not been confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare Viper (650 / 850) with alternatives
| Feature | Viper (650 / 850)OMRON · this robot | Motoman MOTOMINIYaskawa | Motoman PL190Yaskawa | Motoman PL320Yaskawa |
|---|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available | Commercially available |
| Application | Assembly, Material handling | Assembly, Handling | Palletising | Palletising |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Japan | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different market status: commercially available | Different market status: commercially available | Different market status: commercially available |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about Viper (650 / 850)
What is the OMRON Viper (650 / 850)?
OMRON Viper (650 / 850) is an industrial robot from OMRON from Japan, listed for assembly, material handling and machining. Key figures: payload max. 5 kg, reach 653 mm, weight 34 kg. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the OMRON Viper (650 / 850)?
Key figures: payload max. 5 kg, reach 653 mm, weight 34 kg. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the OMRON Viper (650 / 850)?
OMRON Viper (650 / 850) is listed under OMRON, based in Japan. Check local sales and support terms directly with the supplier.
Is the OMRON Viper (650 / 850) available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the OMRON Viper (650 / 850) cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier. Ask a supplier for price information
What is the OMRON Viper (650 / 850) used for?
The applications listed for the OMRON Viper (650 / 850) include assembly, material handling and machining.
What are alternatives to the OMRON Viper (650 / 850)?
Profiles include Yaskawa Motoman MOTOMINI, Yaskawa Motoman PL190 and Yaskawa Motoman PL320. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer industrial.omron.eu
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.