CobotsigusCommercially available
igus ReBeL (4, 5 and 6 axes)
By igus
The igus ReBeL is a lightweight cobot arm with a plastic gearbox, available with 4, 5 or 6 axes.
The igus ReBeL is a light robot arm whose gearbox, according to the manufacturer, is made of plastic. The arm comes in 4, 5 and 6 degree-of-freedom versions and is intended for light assembly, quality inspection and service tasks. Payload is 2 to 3 kg and repeatability is ± 1 mm. The control system is integrated in the base. The ReBeL is therefore not a replacement for a precision cobot but an accessible arm for simple, light tasks. This profile covers the series; the differences per version are in the table.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.- InteractionCollaborative robot arm
Built to work alongside people, after a risk assessment of the application.
- Modular3 models
From ReBeL 4 DOF to ReBeL 6 DOF, see the model table.
- ModularLightweight entry-level cobot
In the cobots category.

- Payload
- 2 to 3 kg
- Reach
- max. 495 to 664 mm
- Repeatability
- ± 1 mm
- Weight
- 6.2 to 8.2 kg
depending on configuration
depending on configuration
How precisely it returns to the same point.
What the robot itself weighs.
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is igus ReBeL (4, 5 and 6 axes)?
igus ReBeL (4, 5 and 6 axes) is a series of collaborative robot arms from igus from Germany, listed for light assembly, quality inspection and education. Key figures: payload 2 to 3 kg, reach max. 495 to 664 mm, repeatability ± 1 mm, weight 6.2 to 8.2 kg. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other collaborative robot arms?
We compare each value with the other collaborative robot arms in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Payload3kg
Low for a collaborative robot arm
Of the 202 others, 166 carry more, 21 the same and 15 less.
Typical: 5 to 18 kg
- Weight8.2kg
Light for a collaborative robot arm
Of the 133 others, 121 are heavier, 1 the same weight and 11 lighter.
Typical: 17.8 to 45 kg
- Reach664mm
Short reach for a collaborative robot arm
Of the 197 others, 167 reach further and 30 less far.
Typical: 820 to 1,600 mm
Application
What was ReBeL (4, 5 and 6 axes) developed for?
Light assembly
Quality inspection
Education
Business fit
When might ReBeL (4, 5 and 6 axes) be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about ReBeL (4, 5 and 6 axes), its manufacturer and this type of robot
The ReBeL (4, 5 and 6 axes) comes in 3 models, with a payload from 3 kg to 2 kg.
- 2008
The first commercially sold cobot was a UR5 from Universal Robots, in December 2008.
Source: Universal Robots, company history A cobot's payload includes the gripper. A 1 kg gripper on a 5 kg cobot leaves 4 kg for the product.
The safety rules for cobots are set out in ISO 10218 and ISO/TS 15066. The latter gives limit values for contact force per body part.
Source: ISO/TS 15066
Video
ReBeL (4, 5 and 6 axes) in action
Video from the manufacturer or an authorised partner.
Models
Which ReBeL (4, 5 and 6 axes) model is right for you?
Compare payload (product plus gripper) and reach first. Values are from the manufacturer.
| Model | Payload | Reach | Weight | Repeatability |
|---|---|---|---|---|
| ReBeL 4 DOF | 3 kg | Max. 495 mm | 6.2 kg | ± 1 mm |
| ReBeL 5 DOF | 2.5 kg | Max. 617 mm | 7.2 kg | ± 1 mm |
| ReBeL 6 DOF | 2 kg | Max. 664 mm | 8.2 kg | ± 1 mm |
Market and supply
Is ReBeL (4, 5 and 6 axes) available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 7 October 2026- Market statusCommercially availableconfirmed
The model is on sale; you can request it from a supplier.
- RegionNot publicly confirmednot confirmed
Not known whether it is supplied in the Netherlands. Ask a supplier.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
1 of 4 settled. The rest depends on the supplier.
Ask about availabilityManufacturer
igus
igus is listed in the Robotleasen directory with one robot model.
OUR INTERPRETATION
Our perspective on ReBeL (4, 5 and 6 axes)
The igus ReBeL is a light robot arm whose gearbox, according to the manufacturer, is made of plastic. The arm comes in 4, 5 and 6 degree-of-freedom versions and is intended for light assembly, quality inspection and service tasks. Payload is 2 to 3 kg and repeatability is ± 1 mm. The control system is integrated in the base. The ReBeL is therefore not a replacement for a precision cobot but an accessible arm for simple, light tasks. This profile covers the series; the differences per version are in the table.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare ReBeL (4, 5 and 6 axes) with alternatives
| Feature | ReBeL (4, 5 and 6 axes)igus · this robot | UR10eUniversal Robots | Panda (FER)Franka Emika | SawyerRethink Robotics |
|---|---|---|---|---|
| Market status | Commercially available | Commercially available | Discontinued | Discontinued |
| Application | Light assembly, Quality inspection | Machine tending, Packaging | Robotics research, Robot control research | Historical machine tending and inspection applications, Grasping and machine vision research |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Netherlands | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different application: machine tending | Different market status: discontinued | Different market status: discontinued |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about ReBeL (4, 5 and 6 axes)
What is the igus ReBeL (4, 5 and 6 axes)?
igus ReBeL (4, 5 and 6 axes) is a series of collaborative robot arms from igus from Germany, listed for light assembly, quality inspection and education. Key figures: payload 2 to 3 kg, reach max. 495 to 664 mm, repeatability ± 1 mm, weight 6.2 to 8.2 kg. Some figures apply under specific conditions; see the robot profile. Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the igus ReBeL (4, 5 and 6 axes)?
Key figures: payload 2 to 3 kg, reach max. 495 to 664 mm, repeatability ± 1 mm, weight 6.2 to 8.2 kg. Some figures apply under specific conditions; see the robot profile. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the igus ReBeL (4, 5 and 6 axes)?
igus ReBeL (4, 5 and 6 axes) is listed under igus, based in Germany. Check local sales and support terms directly with the supplier.
Is the igus ReBeL (4, 5 and 6 axes) available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the igus ReBeL (4, 5 and 6 axes) cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier. Ask a supplier for price information
What is the igus ReBeL (4, 5 and 6 axes) used for?
The applications listed for the igus ReBeL (4, 5 and 6 axes) include light assembly, quality inspection and education.
What are alternatives to the igus ReBeL (4, 5 and 6 axes)?
Profiles include Universal Robots UR10e, Franka Emika Panda (FER) and Rethink Robotics Sawyer. Compare their applications, specifications and market status.
Next step
Could ReBeL (4, 5 and 6 axes) fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.



