Industrial robotsHD Hyundai RoboticsShowcase
HD Hyundai Robotics HDF4-5
The HDF4-5 from HD Hyundai Robotics is a compact high-speed handling robot with 4 kg payload and 581 mm reach.
HD Hyundai Robotics describes the HDF4-5 as a compact handling robot for fast assembly, alignment and transport of parts. (designation on the page: HH4) According to the specification table it has 6 axes, a payload of 4 kg, a reach of 581 mm and a repeatability of ±0.02 mm (as stated by HD Hyundai Robotics). Availability in the Netherlands is not confirmed.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- ProductionIndustrial robot
Reprogrammable manipulator (robot arm) with three or more axes, for automation in industry.
- ModularCompact high-speed handling robot
In the industrial robots category.
- Payload
- 4 kg
- Reach
- 581 mm
- Repeatability
- ±0.02 mm
- Degrees of freedom
- 6
The most weight it can carry or lift.
How far it can reach.
How precisely it returns to the same point.
Number of joints: how freely the arm moves.
Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
What is HD Hyundai Robotics HDF4-5?
HD Hyundai Robotics HDF4-5 is an industrial robot from HD Hyundai Robotics from South Korea, listed for assembling, aligning and transporting parts and fine assembly. Key figures: payload 4 kg, reach 581 mm, repeatability ±0.02 mm, degrees of freedom 6. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other industrial robots?
We compare each value with the other industrial robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Payload4kg
Low for an industrial robot
Of the 727 others, 642 carry more, 31 the same and 54 less.
Typical: 7 to 150 kg
- Weight22kg
Light for an industrial robot
Of the 453 others, 397 are heavier, 5 the same weight and 51 lighter.
Typical: 42 to 1,090 kg
- Reach581mm
Short reach for an industrial robot
Of the 671 others, 598 reach further and 73 less far.
Typical: 901 to 2,710 mm
Application
What was HDF4-5 developed for?
Assembling, aligning and transporting parts
Fine assembly
Business fit
When might HDF4-5 be a fit?
An initial view based on the recorded category and model information
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about HDF4-5, its manufacturer and this type of robot
- 2021
According to ISO 8373:2021, an industrial robot is an automatically controlled manipulator that is reprogrammable, has multiple purposes and can be programmed in three or more axes.
Source: IFR, Industrial robots (ISO 8373) - 1961
In 1961 the Unimate was installed on a General Motors assembly line in Ewing Township, New Jersey. Guinness World Records lists it as the first industrial production robot.
Source: Guinness World Records, First industrial production robot - 2025
A safety standard for industrial robots, ISO 10218-1, appeared in February 2025 as its third edition.
Source: ISO 10218-1:2025 - 2023
Regulation (EU) 2023/1230 (the Machinery Regulation) replaces Machinery Directive 2006/42/EC and applies from 20 January 2027.
Source: EU-OSHA, Regulation (EU) 2023/1230
Market and supply
Is HDF4-5 available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 5 November 2026- Market statusShowcaseconfirmed
Mainly a demonstration model; not regularly on sale.
- RegionSouth Koreaconfirmed
Where the model is supplied, according to the profile.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
2 of 4 settled. The rest depends on the supplier.
View available alternativesManufacturer
HD Hyundai Robotics
HD Hyundai Robotics is listed in the Robotleasen directory with 28 robot models.
OUR INTERPRETATION
Our perspective on HDF4-5
HD Hyundai Robotics describes the HDF4-5 as a compact handling robot for fast assembly, alignment and transport of parts. (designation on the page: HH4) According to the specification table it has 6 axes, a payload of 4 kg, a reach of 581 mm and a repeatability of ±0.02 mm (as stated by HD Hyundai Robotics). Availability in the Netherlands is not confirmed.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare HDF4-5 with alternatives
| Feature | HDF4-5HD Hyundai Robotics · this robot | Motoman MOTOMINIYaskawa | Motoman PL190Yaskawa | Motoman PL320Yaskawa |
|---|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available | Commercially available |
| Application | Assembling, aligning and transporting parts, Fine assembly | Assembly, Handling | Palletising | Palletising |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | South Korea | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different market status: commercially available | Different market status: commercially available | Different market status: commercially available |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about HDF4-5
What is the HD Hyundai Robotics HDF4-5?
HD Hyundai Robotics HDF4-5 is an industrial robot from HD Hyundai Robotics from South Korea, listed for assembling, aligning and transporting parts and fine assembly. Key figures: payload 4 kg, reach 581 mm, repeatability ±0.02 mm, degrees of freedom 6. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the HD Hyundai Robotics HDF4-5?
Key figures: payload 4 kg, reach 581 mm, repeatability ±0.02 mm, degrees of freedom 6. Values as recorded on the robot profile, generally based on manufacturer information. Configuration and operating conditions can change the figures; confirm them with the supplier.
Which supplier is listed for the HD Hyundai Robotics HDF4-5?
HD Hyundai Robotics HDF4-5 is listed under HD Hyundai Robotics, based in South Korea. Check local sales and support terms directly with the supplier.
Is the HD Hyundai Robotics HDF4-5 available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the HD Hyundai Robotics HDF4-5 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the HD Hyundai Robotics HDF4-5 used for?
The applications listed for the HD Hyundai Robotics HDF4-5 include assembling, aligning and transporting parts and fine assembly.
What are alternatives to the HD Hyundai Robotics HDF4-5?
Profiles include Yaskawa Motoman MOTOMINI, Yaskawa Motoman PL190 and Yaskawa Motoman PL320. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer hd-hyundairobotics.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.