Cleaning robotsCenoBotsCommercially available
CenoBots SP50
By CenoBots
Dry floor cleaner that actively seeks visible debris.
SP50 is CenoBots’ dry spot-cleaning robot. The manufacturer describes a machine that looks for floor debris and selectively vacuums it. This gives it a different working method from the L50 scrubber dryers. The manufacturer publishes suction pressure and maximum runtime without a complete public measurement protocol. For a manager, the relevant questions concern the dry debris encountered and how the floor changes during the day. Agree in advance who empties the robot, maintains filters and treats areas the robot does not handle. A practical session with representative debris helps define the intended cleaning task and ongoing care requirements.
Status 2026
Commercially availableThis model is listed as commercially available. Delivery, configuration and support vary by supplier and region.What is CenoBots SP50?
CenoBots SP50 is a cleaning robot from CenoBots from Singapore, listed for collecting dry floor debris and targeted cleaning between full cleaning rounds. Key figures: suction pressure 25 kPa (manufacturer specification), height 105 cm (SP50), cleaning width 72 cm (sweeping width, SP50), runtime Up to 13 hours (manufacturer maximum; test conditions unspecified). Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other cleaning robots?
We compare each value with the other cleaning robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Runtime13h
Long runtime for a cleaning robot
Of the 101 others, 3 run longer per charge and 98 shorter.
Typical: 3.5 to 7 h
- Height105cm
Typical for a cleaning robot
Of the 34 others, 11 are taller and 23 shorter.
Typical: 45 to 109 cm
Application
What was SP50 developed for?
Collecting dry floor debris
Targeted cleaning between full cleaning rounds
Business fit
When might SP50 be a fit?
An initial view based on the recorded category and model information
What CenoBots says
- Dry floor cleaner that actively seeks visible debris.
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about SP50, its manufacturer and this type of robot
Robotleasen lists 5 robots from CenoBots. You can find them all on the supplier page.
Video
SP50 in action
Video from the manufacturer or an authorised partner.
Market and supply
Is SP50 available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 4 October 2026- Market statusCommercially availableconfirmed
The model is on sale; you can request it from a supplier.
- RegionNot publicly confirmednot confirmed
Not known whether it is supplied in the Netherlands. Ask a supplier.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
1 of 4 settled. The rest depends on the supplier.
Ask about availabilityManufacturer
CenoBots
Organisation named in the documentation for L50, SP50. This profile links to product or developer information; current support and supply are unconfirmed.
OUR INTERPRETATION
Our perspective on SP50
SP50 is CenoBots’ dry spot-cleaning robot. The manufacturer describes a machine that looks for floor debris and selectively vacuums it. This gives it a different working method from the L50 scrubber dryers. The manufacturer publishes suction pressure and maximum runtime without a complete public measurement protocol. For a manager, the relevant questions concern the dry debris encountered and how the floor changes during the day. Agree in advance who empties the robot, maintains filters and treats areas the robot does not handle. A practical session with representative debris helps define the intended cleaning task and ongoing care requirements.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare SP50 with alternatives
| Feature | SP50CenoBots · this robot | X16 SWEEPTennant | BG1 SeriesPudu Robotics | SPIDERAX Solar Robot |
|---|---|---|---|---|
| Market status | Commercially available | Commercially available | Commercially available | Commercially available |
| Application | Collecting dry floor debris, Targeted cleaning between full cleaning rounds | Sweeping dry debris on industrial indoor floors, Scheduled autonomous sweeping tasks | Sweeping and wet scrubbing of indoor floors, Cleaning along floor and shelving edges | Automatic brush cleaning of commercial rooftop solar panels, Recurring cleaning cycles from a permanent installation |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different application: sweeping dry debris on industrial indoor floors | Different application: sweeping and wet scrubbing of indoor floors | Different application: automatic brush cleaning of commercial rooftop solar panels |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about SP50
What is the CenoBots SP50?
CenoBots SP50 is a cleaning robot from CenoBots from Singapore, listed for collecting dry floor debris and targeted cleaning between full cleaning rounds. Key figures: suction pressure 25 kPa (manufacturer specification), height 105 cm (SP50), cleaning width 72 cm (sweeping width, SP50), runtime Up to 13 hours (manufacturer maximum; test conditions unspecified). Market status: commercially available. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the CenoBots SP50?
Key figures: suction pressure 25 kPa (manufacturer specification), height 105 cm (SP50), cleaning width 72 cm (sweeping width, SP50), runtime Up to 13 hours (manufacturer maximum; test conditions unspecified). Manufacturer maxima, not measured project results. Weight, height and speed have not been taken from distributors.
Which supplier is listed for the CenoBots SP50?
CenoBots SP50 is listed under CenoBots, based in Singapore. Check local sales and support terms directly with the supplier.
Is the CenoBots SP50 available to buy or lease in the Netherlands?
Commercially available. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the CenoBots SP50 cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier.
What is the CenoBots SP50 used for?
The applications listed for the CenoBots SP50 include collecting dry floor debris and targeted cleaning between full cleaning rounds.
What are alternatives to the CenoBots SP50?
Profiles include Tennant X16 SWEEP, Pudu Robotics BG1 Series and AX Solar Robot SPIDER. Compare their applications, specifications and market status.
Next step
Could SP50 fit your organisation?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer cenobots.com
- Manufacturer cenobots.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.



