Inspection and security robotsBoxfish RoboticsShowcase
Boxfish Robotics ARV-i
Resident underwater robot with a dock for repeated inspection and data transfer.
ARV-i is designed by Boxfish Robotics and uses Krona SubSea technology. It leaves an installed underwater dock for planned inspections and returns for wireless charging and data transfer. The dock installation uses a cable or a solar/communications buoy. The vehicle measures 750 × 645 × 340 mm and weighs 28 kg with salt-water ballast. Dock infrastructure and selected sensors form part of the project configuration.
Status 2026
ShowcaseThis model is listed as a showcase. Direct commercial availability has not been confirmed.- PrecisionUnderwater inspection
- PrecisionUnderwater environmental monitoring

- Weight
- 28 kg
- Degrees of freedom
- 6
- Runtime per charge
- up to 10 hours
with zoutwaterballast
Number of joints: how freely the arm moves.
duiktijd; depending on omstandigheden
Manufacturer values for the stated configuration; additional sensors and tools are optional.
What is Boxfish Robotics ARV-i?
Boxfish Robotics ARV-i is an inspection and security robot from Boxfish Robotics, listed for underwater inspection and underwater environmental monitoring. Key figures: weight 28 kg, degrees of freedom 6, runtime per charge up to 10 hours. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
How does it compare with other inspection and security robots?
We compare each value with the other inspection and security robots in our guide for which it is known. Typical is the middle half. Values according to the manufacturers; caveats are noted with the key figures at the top.
- Runtime10h
Long runtime for an inspection and security robot
Of the 77 others, 12 run longer per charge, 7 as long and 58 shorter.
Typical: 3.5 to 9 h
- Weight28kg
Typical for an inspection and security robot
Of the 120 others, 58 are heavier and 62 lighter.
Typical: 9 to 110 kg
Application
What was ARV-i developed for?
Underwater inspection
Underwater environmental monitoring
Business fit
When might ARV-i be a fit?
An initial view based on the recorded category and model information
What Boxfish Robotics says
- Resident underwater robot with a dock for repeated inspection and data transfer.
May be suitable for
- Organisations assessing a robot for a defined task and work environment.
- Teams comparing the robot's recorded profile with other options.
- Businesses that want to validate the application and integration requirements.
Considerations
- Confirm capabilities and current availability with the manufacturer or supplier.
- Check the work environment, integration needs and local support before selecting a model.
Facts
Did you know?
Notable facts about ARV-i, its manufacturer and this type of robot
In power plants, for example, inspection robots read meters and trace leaks with thermal or gas sensors.
Robotleasen lists 5 robots from Boxfish Robotics. You can find them all on the supplier page.
Video
ARV-i in action
Market and supply
Is ARV-i available?
A profile status is not a confirmed offer or delivery time
What is settled?
Checked 12 October 2026- Market statusShowcaseconfirmed
Mainly a demonstration model; not regularly on sale.
- RegionNot publicly confirmednot confirmed
Not known whether it is supplied in the Netherlands. Ask a supplier.
- Lease / RaaSNot confirmednot confirmed
No supplier has confirmed lease or robot-as-a-service.
- RentalNot confirmednot confirmed
No supplier has confirmed rental.
1 of 4 settled. The rest depends on the supplier.
View available alternativesManufacturer
Boxfish Robotics
Organisation named in the documentation for Alpha. This profile links to product or developer information; current support and supply are unconfirmed.
OUR INTERPRETATION
Our perspective on ARV-i
ARV-i is designed by Boxfish Robotics and uses Krona SubSea technology. It leaves an installed underwater dock for planned inspections and returns for wireless charging and data transfer. The dock installation uses a cable or a solar/communications buoy. The vehicle measures 750 × 645 × 340 mm and weighs 28 kg with salt-water ballast. Dock infrastructure and selected sensors form part of the project configuration.
Lease or rent
Can you lease this robot?
Leasing options for this model are not in our data. Ask the supplier about leasing, rental or Robot-as-a-Service, or use our request page for advice.
Compare
Compare ARV-i with alternatives
| Feature | ARV-iBoxfish Robotics · this robot | IguanaExail | Cameleon LGExail | Dragonfish SeriesAutel Robotics |
|---|---|---|---|---|
| Market status | Showcase | Commercially available | Commercially available | Commercially available |
| Application | Underwater inspection, Underwater environmental monitoring | Reconnoitring difficult-to-reach locations with cameras, Moving sensor equipment during professional inspections | Reconnoitring locations remotely with cameras, Supporting inspections with interchangeable sensor equipment | Energy-infrastructure inspection, Observation for monitoring and emergency management |
| Deployment | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Region | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed | Not publicly confirmed |
| Difference | — | Different market status: commercially available | Different market status: commercially available | Different market status: commercially available |
| Link | View robot | View robot | View robot |
Frequently asked questions
Questions about ARV-i
What is the Boxfish Robotics ARV-i?
Boxfish Robotics ARV-i is an inspection and security robot from Boxfish Robotics, listed for underwater inspection and underwater environmental monitoring. Key figures: weight 28 kg, degrees of freedom 6, runtime per charge up to 10 hours. Some figures apply under specific conditions; see the robot profile. Market status: showcase. Availability and deployment options should be confirmed with a supplier. Robotleasen does not sell robots; it helps businesses compare suppliers and recorded information.
What are the specifications of the Boxfish Robotics ARV-i?
Key figures: weight 28 kg, degrees of freedom 6, runtime per charge up to 10 hours. Some figures apply under specific conditions; see the robot profile. Manufacturer values for the stated configuration; additional sensors and tools are optional.
Which supplier is listed for the Boxfish Robotics ARV-i?
Boxfish Robotics ARV-i is listed under Boxfish Robotics, based in Not publicly confirmed. Check local sales and support terms directly with the supplier.
Is the Boxfish Robotics ARV-i available to buy or lease in the Netherlands?
Showcase. Deployment: not confirmed. Whether this model is available to buy, rent or lease in the Netherlands depends on the supplier. Ask a supplier to confirm current availability.
How much does the Boxfish Robotics ARV-i cost?
No reliable public price is listed for this model. Costs depend on configuration and supplier. Ask a supplier for price information
What is the Boxfish Robotics ARV-i used for?
The applications listed for the Boxfish Robotics ARV-i include underwater inspection and underwater environmental monitoring.
What are alternatives to the Boxfish Robotics ARV-i?
Profiles include Exail Iguana, Exail Cameleon LG and Autel Robotics Dragonfish Series. Compare their applications, specifications and market status.
Next step
Looking for a robot that is available today?
Review the recorded market status, applications and alternatives for this robot. We do not sell robots ourselves, but help you compare suppliers and terms.
Sources and checks
Checked against the manufacturer · last checked
- Manufacturer boxfishrobotics.com
Specifications are generally based on manufacturer information and have not been measured by Robotleasen. See our editorial approach.



